HCAL Operations

On Call Cheat Sheet

Setting up Tunnels

Follow the HCAL Connectivity twiki to get tunnels working for lxplus,904, and p5 networks. The best choice for windows is to use linux with a virtual box. If you are on lxplus already at cern with a windows computer putty works well too.

Setup Environment

Bash files

Snippets

Getting the Hcal config files point 5: (should be the same for 904) $ cfgcvs checkout HcalCfg

Very similar to svn $ cvs commit -m "Comment here" $ cvs tag -F pro DTC.cfg

MCH Commands

telnet hcal-mch-20 (the hcal-mch-20 is like in HcalCfg/uTCA/connection.xml with hcal-card-crate-additionaloption)
>> show_fru
(M4 is on)
>> shutdown <fru_number>
(Probably do show_fru again to make sure the state goes to M1 of the particular card)
>> fru_start <fru_number>
 
>> exit
 
 
To shut down all cards:
>>shutdown all
To reboot ( this also restart the MCH so you will be disconnected. Wait ten seconds or so and then telnet back in to see status)
>> reboot

Run Control Websites

P5: http://cmsrc-hcal.cms:16000/rcms/gui/servlet/RunGroupChooserServlet

904: http://cms904rc-hcal.cms904:16000/rcms/gui/servlet/RunGroupChooserServlet

Building 28: http://cmshcal21:16000/rcms/gui/servlet/RunningConfigurationServlet

uHTR

The uHTR tool is pretty straightforward. The only thing to watch out for is that the back and front fpga firmware should not be mixed up (and they can be…). Also, the versions should match between front and back. This should be both the detector part (HF, HBHE) and the number after it which is the speed (1600 = 1.6Gbps, 4800 = 4.8Gbps). Examples match below: uhtr_front_HBHE1600_1_00_07.mcs.xz uhtr_back_HBHE1600_1_00_00.mcs.xz

Correct Use for P5/904: $ uHTRtool.exe -c crate:slot (uHTRtool.exe -c 52:10) Not sure yet what the shell script does (uHTRtool.sh)

Log Files

Go to 904 or p5 network Ssh cms904rc-hcal (for 904) Ssh cmsrc-hcal (for p5) Run the handsaw script (this is located in ~hcalsw/bin/): $ Handsaw.pl /var/log/rcms/hcalpro/Logs_hcalpro.xml] $ tail -f /var/log/rcms/hcalpro/Logs_hcalpro.xml | Handsaw.pl Tail streams the errors out. Probably the best to look at.

Parsing through old Logs: Copy the log file you want to look at. They are usually in a compressed (.gz). To open them: $ gunzip file.gz

Once you have the log file, you can use Handsaw and less to look through them: $ Handsaw.pl logfile.xml | less -R

-- DanielArcaro - 21 Jun 2017

Edit | Attach | Watch | Print version | History: r8 | r4 < r3 < r2 < r1 | Backlinks | Raw View | Raw edit | More topic actions...
Topic revision: r2 - 21 Jun 2017 - DanielArcaro
 
  • Edit
  • Attach
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2020 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback