2011-12-02, hazen

Started this log. One dead NAT-MCH at Boston. 2nd NAT-MCH shipped from MN by Jeremy.

Reset I/P address to 192.168.1.11 and connect to CMS1. One can now do cms1> telnet 192.168.1.11. But, this MCH has firmware v2.0 which doesn't work with AMC13 (symptom is both red/green LEDs blink forever on AMC13 with MMC firmware V1.2).

Updating MCH firmware to V2.10 received from NAT on 9/20/11. Briefly, the procedure is:

  unzip the e-mail attachement somewhere
  copy the "bin" file to /tftpboot/mch on cms1.bu.edu
  connect to the MCH using the USB console and type "update_firmware" and follow the prompts
  type "reboot" to load the new firmware

It works! Now the AMC13 seems to be up and running with the MCH.

-- EricHazen - 02 Dec 2011