See also FinalAMC13Discussion page at CERN with collaborators` requests Hardware / Production Front panel labels Assign serial numbers to all boards...
AMC13 C Class AMC13Tool Value 0xffffffff can`t be written, e.g. `wv 0x2 0xffffffff` fails with `must be a positive integer` Status Display Maintenance...
We have made a design change to the T2 board to improve the timing of the TTC clock vs data. The extracted TTC clock is sent on the MicroTCA clock network (received...
This page overview the functionalities of the TTT software packages, including descriptions of the trigger scripts and the TTTtool commands. Contents TTTtool...
This page contains both PyChips based (using Python) and microHAL based (using C ) software packages for the control, readout, and programming of the TTT TTC Simulator...
From Jeroen Hegeman on 2013 12 09: Ayayayay... I found the problem. It turns out that in the SLC6 machine the admins installed for me in 904, I had a different ipmitool...
Sending Data Over the fiber (front) DAQLink Connect the hardware correctly The DAQ Link optical fiber cable should be connected to the second from the...
Enable mCTR2 DAQ Path Open mCTR2 tool w/ in uhtr mode (i.e. with option: ` t uhtr`) ./mCTR2tool.exe mCTR2 Board IP address t uhtr Check to see if DAQ Path is enabled...
Info from Arno, 2013 12 04: Hi again! Ok, here is further info about the Boost Python library: `The Boost Python Library is a framework for interfacing Python and...