Recent Changes in BUCMSPublic Web retrieved at 04:12 (GMT)

High Rates Test Procedure Test procedure for building events from uHTR, while using TTT as TTC source. Test procedure assumes certain tools are available, namely...
AMC13Tool Common Procedures Actions Update Firmware Updated for AMC13Tool2 Initialize AMC13 Need updating for AMC13Tool2 Send Local Triggers...
This page describes a simple alternative T3 board for the AMC13XG fabricated at Boston for testing G 2 external clock/trigger inputs. Schematic: http://ohm...
OBSOLETE This page documents an integrated DAQ link receiver built into the AMC13. For firmware version v 0x10 this works fine using the old `Wu` format DAQ link...
Hi, Attached is the zip file of all manufacturing files. The board has version 0.3 now. The BOM remains the same as before, so not generated this time. Components...
TTC Receiver N.B.: DO NOT USE THE FIRMWARE ON THIS PAGE TO RECEIVE TTC SIGNALS FROM THE AMC13. Use the one available here instead: AMC13BackplaneLink This page documents...
The following procedures describe the installation process for xDAQ releases for the HCAL Upgrade project. NOTE that the code has been migrated to SVN (instead...
IGNORE THIS PAGE; IT IS OBSOLETE; FOR HISTORICAL INTEREST ONLY Please see AMC13BackplaneLink for current information. Here are some notes on the DAQ interface...
2014 07 15, hazen Babak complains that he isn`t getting TTC. Using fw 0x109/0x21. Status display looks reasonable (r0 0x55000009 r1 0x01090001) Asked him to...
For published AMC13 overviews, see: JINST paper ACES 2014 Poster Clocks There is a quad clock synthesizer (Si5338B) with the following outputs programmed...
From CMS firmware 0x202 and onward the new event builder seems to be working. Here is an example of how to generate a fake multi block event and unpack it. To initialize...
This page is designed to help you get familiar with the AMC13Tool C software and get comfortable with some basic AMC13 functionalities. For a more in depth look...
Below are the formats for a few useful IPMI commands for the AMC13 as provided by Jes Tikalsky (jtikalsky #64;hep.wisc.edu) with the University of Wisconsin group...
See also FinalAMC13Discussion page at CERN with collaborators` requests Hardware / Production Front panel labels Assign serial numbers to all boards...
AMC13 C Class AMC13Tool Value 0xffffffff can`t be written, e.g. `wv 0x2 0xffffffff` fails with `must be a positive integer` Status Display Maintenance...
AMC13 Rev 2 Block Diagram 15 Rev 2 boards are under test at BU in April 2013. AMC13XG Debug Log PCB Design Information Views handy screen shots...
We have made a design change to the T2 board to improve the timing of the TTC clock vs data. The extracted TTC clock is sent on the MicroTCA clock network (received...
This page overview the functionalities of the TTT software packages, including descriptions of the trigger scripts and the TTTtool commands. Contents TTTtool...
This page contains both PyChips based (using Python) and microHAL based (using C ) software packages for the control, readout, and programming of the TTT TTC Simulator...
From Jeroen Hegeman on 2013 12 09: Ayayayay... I found the problem. It turns out that in the SLC6 machine the admins installed for me in 904, I had a different ipmitool...

«Previous   1  2  3  4  5  6  7  8   Next»

Show 10, 20, 50, 100, 500, 1000 results per page, or show all.

Related topics: RSS feed, rounded corners RSS feed, ATOM feed, WebNotify, site changes, site map

Edit | Attach | Watch | Print version | History: r4 < r3 < r2 < r1 | Backlinks | Raw View | Raw edit | More topic actions
Topic revision: r4 - 15 Nov 2006 - TWikiContributor
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2023 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback