High Rates Test Procedure Test procedure for building events from uHTR, while using TTT as TTC source. Test procedure assumes certain tools are available, namely...
This page describes a simple alternative T3 board for the AMC13XG fabricated at Boston for testing G 2 external clock/trigger inputs. Schematic: http://ohm...
OBSOLETE This page documents an integrated DAQ link receiver built into the AMC13. For firmware version v 0x10 this works fine using the old `Wu` format DAQ link...
Hi, Attached is the zip file of all manufacturing files. The board has version 0.3 now. The BOM remains the same as before, so not generated this time. Components...
TTC Receiver N.B.: DO NOT USE THE FIRMWARE ON THIS PAGE TO RECEIVE TTC SIGNALS FROM THE AMC13. Use the one available here instead: AMC13BackplaneLink This page documents...
The following procedures describe the installation process for xDAQ releases for the HCAL Upgrade project. NOTE that the code has been migrated to SVN (instead...
IGNORE THIS PAGE; IT IS OBSOLETE; FOR HISTORICAL INTEREST ONLY Please see AMC13BackplaneLink for current information. Here are some notes on the DAQ interface...
2014 07 15, hazen Babak complains that he isn`t getting TTC. Using fw 0x109/0x21. Status display looks reasonable (r0 0x55000009 r1 0x01090001) Asked him to...
For published AMC13 overviews, see: JINST paper ACES 2014 Poster Clocks There is a quad clock synthesizer (Si5338B) with the following outputs programmed...