Recent Changes in BUCMSPublic Web retrieved at 09:07 (GMT)
New analysis code being developed for 2014 data format New code is being developed by Daniel Arcaro with help from Eric Hazen and Dan Gastler to analyze the new/final...
The details of this depend on the facilities available. Generally the possible values we might want to generate alarms on fall into the following categories:...
Some ideas on AMC13 HyperDAQ code structure. Currently have amc13::Status with Report() and set/get methods for HTML, BareHTML and LaTeX. Suggest the following...
Tags 1.1.5 Increment makefile rev Add AMC13::getL1AHistory() for new L1A history at 0x100 Update address table Add l1a command to AMC13Tool2 to display...
NAT MCH Firmware Notes by Mark Dobson (copied from CERN Twiki) The majority of NAT MCHs came with firmware version V2.15 which is very buggy. There issues with powering...
The following are instructions on how to install the Xilinx LabTools iMPACT software on an SLC5 machine. This procedure can be generalized to the Red Hat Linux distribution...
Everything on this page is OBSOLETE . See AMC13CppProductionSoftware . This page describes `Legacy` C software for the AMC13. The intention is that new users...
AMC13 MMC Software The AMC13 MMC software package can be found in the amc13/dev tools/amc13Config directory in the amc13 svn, amc13config directory in the xDAQ...
Flash Programming The AMC13 flash memory is divided into 4 regions as follows: NOTE: Table needs to be updated with new firmwares Offset Name File Name...
Everything here is OBSOLETE. This code will no longer work as the underlying libraries don`t work with IPBus firmware any more. Releases amc13 python noTests...
AMC13 Tool Acquisition and Installation This software is OBSOLETE. Please see AMC13CppProductionSoftware for information on the new software. Current code is...
High Rates Test Procedure Test procedure for building events from uHTR, while using TTT as TTC source. Test procedure assumes certain tools are available, namely...
AMC13Tool Common Procedures Actions Update Firmware Updated for AMC13Tool2 Initialize AMC13 Need updating for AMC13Tool2 Send Local Triggers...
This page describes a simple alternative T3 board for the AMC13XG fabricated at Boston for testing G 2 external clock/trigger inputs. Schematic: http://ohm...
OBSOLETE This page documents an integrated DAQ link receiver built into the AMC13. For firmware version v 0x10 this works fine using the old `Wu` format DAQ link...
Hi, Attached is the zip file of all manufacturing files. The board has version 0.3 now. The BOM remains the same as before, so not generated this time. Components...
TTC Receiver N.B.: DO NOT USE THE FIRMWARE ON THIS PAGE TO RECEIVE TTC SIGNALS FROM THE AMC13. Use the one available here instead: AMC13BackplaneLink This page documents...
The following procedures describe the installation process for xDAQ releases for the HCAL Upgrade project. NOTE that the code has been migrated to SVN (instead...
IGNORE THIS PAGE; IT IS OBSOLETE; FOR HISTORICAL INTEREST ONLY Please see AMC13BackplaneLink for current information. Here are some notes on the DAQ interface...
2014 07 15, hazen Babak complains that he isn`t getting TTC. Using fw 0x109/0x21. Status display looks reasonable (r0 0x55000009 r1 0x01090001) Asked him to...
For published AMC13 overviews, see: JINST paper ACES 2014 Poster Clocks There is a quad clock synthesizer (Si5338B) with the following outputs programmed...
This page is designed to help you get familiar with the AMC13Tool C software and get comfortable with some basic AMC13 functionalities. For a more in depth look...
Below are the formats for a few useful IPMI commands for the AMC13 as provided by Jes Tikalsky (jtikalsky #64;hep.wisc.edu) with the University of Wisconsin group...
See also FinalAMC13Discussion page at CERN with collaborators` requests Hardware / Production Front panel labels Assign serial numbers to all boards...
AMC13 C Class AMC13Tool Value 0xffffffff can`t be written, e.g. `wv 0x2 0xffffffff` fails with `must be a positive integer` Status Display Maintenance...
AMC13 Rev 2 Block Diagram 15 Rev 2 boards are under test at BU in April 2013. AMC13XG Debug Log PCB Design Information Views handy screen shots...
We have made a design change to the T2 board to improve the timing of the TTC clock vs data. The extracted TTC clock is sent on the MicroTCA clock network (received...
This page overview the functionalities of the TTT software packages, including descriptions of the trigger scripts and the TTTtool commands. Contents TTTtool...
This page contains both PyChips based (using Python) and microHAL based (using C ) software packages for the control, readout, and programming of the TTT TTC Simulator...
From Jeroen Hegeman on 2013 12 09: Ayayayay... I found the problem. It turns out that in the SLC6 machine the admins installed for me in 904, I had a different ipmitool...
Sending Data Over the fiber (front) DAQLink Connect the hardware correctly The DAQ Link optical fiber cable should be connected to the second from the...
Enable mCTR2 DAQ Path Open mCTR2 tool w/ in uhtr mode (i.e. with option: ` t uhtr`) ./mCTR2tool.exe mCTR2 Board IP address t uhtr Check to see if DAQ Path is enabled...
Info from Arno, 2013 12 04: Hi again! Ok, here is further info about the Boost Python library: `The Boost Python Library is a framework for interfacing Python and...
AMC13 Software Restructuring Twiki A page for organizing the restructuring of the AMC13 Software To Do List AMC13 Software Restructuring To Do List Reference...
AMC13 Software Meeting 2013 12 05 Attendance: Eric, Arno We attempted to define more clearly the scope of the project and tasks. First, the project scope:...
A start from Arno, by e mail 2013 12 03: As promised here is the first update about the existence of any software writing guidelines: None from xDAQ, TriggerSupervisor...
AMC13 Software Restructuring Meeting Minutes: 2013, December 3 Meeting Minutes were taken retroactively, so some details may be inaccurate or missing. Suggesting that...
AMC13 Software Restructuring To Do List To Do: Compare AMC13 and MP7 code and suggest changes to AMC13 code (Dave, Ben) Completed Tasks: Create Software...
Using AMC13Tool Using the tool at P5: ssh cmsusr0 ssh hcaldaq12 source /nfshome0/hcalsw/bin/env.sh (or .csh) AMC13Tool.exe Pick an action (h for...
Hardware and Firmware documentation: Webpage TTT Software Packages TTT Software Documentation TTT Software Procedures EricHazen 14 May...
Starting now (Nov 2013) we are working with the trigger and IPBus guys to develop a generic GUI which can meet the following criteria: Render a reasonable display...
Active 1. readIPs.py and others should report the host and slot used, and translate the hex to decimal. added 2013 09 16 by esh History 1. Create new module...
CACTUS Installation This page contains instructions on how to install different CACTUS builds on supported operating systems. Many of these same instructions can...
10 Prototype boards with red front panels were manufactured in early 2009. These boards are not identical to the production boards because they have a smaller...
The uHTRs acquire their IP address based on their location within the uTCA crate, specifically via their slot number, following the scheme below: uHTR IP Address...
The register documentation and firmware is maintained by Chris Woodall (chris.j.woodall #64;gmail.com) and is kept at the following link User Manual CharlieHill...
This page contains a table of method declarations and descriptions for the AMC13uHAL C Class. Constructor Method Description AMC13uHAL::AMC13uHAL(uhal...
AMC13 C Classes Below is a table of the AMC13 C classes as of 05/30/2013 with a brief description and a link to a page with a more in depth look at each class`s...
This page contains a table of method declarations and descriptions for the AMC13 verify C Class. Constructor Method Description AMC13 verify::AMC...
This page contains a table of method declarations and descriptions for the AMC13 C Class. NOTE!! The AMC13 class builds two ipDev objects which are used to talk...
RSS feed, ATOM feed, WebNotify, site changes, site map 
Topic revision: r4 - 15 Nov 2006 - TWikiContributor
Site map
BUCMSPublic web
Create New Topic
Index
Search
Changes
Notifications
Statistics
Preferences
Account 
Copyright © 2008-2023 by the contributing authors. All material on this collaboration platform is the property of the contributing authors. Ideas, requests, problems regarding TWiki? Send feedback