Actions Enable Backplane Read TTC Clock PLEASE NOTE: These are instructions for users who have an understanding of the Building 28 system and of the AMC13Tool...
Eric, 0x24a has implemented the double buffering of monitor counters. Registers 0x0, 0x3, 0x4, 0x5, 0x2c and 0x30 0x59(resync counter has been moved from bit 31...
We`re starting to think about a successor to AMC13 for ATCA. There have been some complaints about the place holder name `Blade13`. PLEASE SUGGEST new names on this...
AMC13 to AMC Backplane Link We have developed firmware to assist AMC module developers in communicating with the AMC13. The current version (as of May 2014) is documented...
Each AMC13 has a hardware serial number determined by solder jumpers on the T2 board (8 bits 1 9th bit). This number determines the MAC address, and is therefore...
Programming AMC13 Flash with AMC13ToolFlash These instructions are for initial programming of the AMC13 or for recovery of AMC13 after flash has been corrupted. This...
New analysis code being developed for 2014 data format New code is being developed by Daniel Arcaro with help from Eric Hazen and Dan Gastler to analyze the new/final...
The details of this depend on the facilities available. Generally the possible values we might want to generate alarms on fall into the following categories:...