AMC13 Debugging Hints My AMC13 is plugged in but I can`t contact it! Check sensor info (NAT MCH) If you have an NAT MCH, you can learn a lot about the state of your...
Getting started with new AMC13 software: 1. Install SLC6 OS and Cactus tools on your computer. install Cactus install 2. Check out AMC13 software package and...
AMC13 Software Development workflow Overview of the workflow The recommended way to make change to the AMC13 software is as follows: 1 Create a branch in the AMC...
Pre Registration Procedure for CMS To complete the pre registration procedure for CMS and get a CMS Computing Account, the following should be done: The person in...
Welcome to the 1 web Available Information CharliesHcalElectronicsAcronymList CMS Pre Registration Procedure: http://bucms.bu.edu/twiki/bin/view/BUCMSPublic/CMSPreregistrationPro...
NAT MCH We have an NAT MCH in one of our cates. It is at 192.168.1.41 in our setup. You can telnet to it and you`ll be connected to a command line utility with many...
To Do 2018 01 25 (djarcaro) The flash programming incorrectly selects an address when the name is slightly off. Example below: Using a FW file called AMC13T2Goldenv0xfff...
In progress 2015 01 07 In order to distribute bug fixes and software updates to the users of the AMC13, we need to generate a new tag on the cactus svn and generate...
AMCT Python Software AMCT Purpose The goal is to develop a set of routines to automatically (i.e. without human intervention) test AMC13 hardware using python language...
This page describes new (as of early 2015) python bindings to the AMC13 software. This is very much a work in progress, but at least one demo program now works. See...
The AMC13 requires at least one SFP in the bottom site (for TTC) and typically 1 3 different type SFP in the upper 3 sites for DAQ. See sketch below. The TTC SFP...
Links below for uHTR firmware pages. To check out a specific revision use e.g: $ svn co r 4209 svn ssh://your username@svn.cern.ch/reps/cms firmwsrc/hcal/uhtr/trunk...
This page contains some uHTRTool software procedures which are useful to an AMC13 debugger and developer. Contents Program uHTR Flash Enable uHTR DAQ...
To connect to an HCAL uTCA crate a P5 (as of 2016 04 13): $ ssh lxplus.cern.ch (CERN login) $ ssh cmsusr $ ssh hcalutca01 $ ~hcalsw/bin/AMC13Tool2 wu.sh...
Proposed new database and versioning system for AMC13 firmware. Version numbers Currently we have many AMC13FirmwareFlavors each with their own range of version...