In order to access your device using a JTAG USB interface, you need to make sure that the cable is correctly connected and that there is a live AMC13 which the iMPACT...
amc13 control.py Documentation Notes The primary purpose of this AMC13 python tool is to talk to the board and carry out simple debugging procedures. However...
The following table contains configurable variables for the inialization and state determination of the AMC13 within the xDAQ environment prior to taking a run. These...
Update Firmware using `p flash.py` First, download and install the latest AMC13Python tarball found here. This latest release will contain the latest firmware...
Below are the releases of the standalone, non xDAQ C software for the AMC13. This software requires a CACTUS installation on the host machine. If you have installed...
Charlie`s Acronym List $ ADC: Analog to Digital Converter $ AMC: Advanced Mezzanine Card. An electronics module which mounts in an ATCA or MicroTCA crate...
The DCC2 is intended to be plug compatible with the DCC1. There are some hardware differences: DCC2 occupies the right slot covered by the front panel, while...
HTR to DCC2 links use National DS90CR285/286 Channel Link technology. These are in principle 28 bit links but we only use 24 of them. The low level link format is...