This page contains a table of method declarations and descriptions for the AMC13AddressCppClass AMC13 address C Class . Constructor Method Description...
This page contains a table of method declarations and descriptions for the AMC13 flash C Class. Constructor Method Description AMC13 flash::AMC13 flash...
This page contains a table of method declarations and descriptions for the AMC13 env C Class. Enumerations Enum Typedef Enum Description IPbusVersion...
Below is the official configuration bytes sent by the MMC to the AMC13 via the SPI interface. For a more detailed look at the MMC FPGA SPI interface, see the of Wisconsin...
How to log on to 904 hcal904daq01 is in a brand new, not yet fully configured private network of B 904. To log in you should first log onto lxplus.cern.ch and then...
2013 05 29 hazen Build MMC v2.1 from tom using default settings in AVR studio 6.1 and flash. Payload power comes on, MMC messages look ok but can`t ping at jumper...
The TTT firmware is developed and maintained by Christopher Woodall (chris.j.woodall #64;gmail.com). The MCS files and source can be found at the following link:...
In order to access your device using a JTAG USB interface, you need to make sure that the cable is correctly connected and that there is a live AMC13 which the iMPACT...
amc13 control.py Documentation Notes The primary purpose of this AMC13 python tool is to talk to the board and carry out simple debugging procedures. However...
The following table contains configurable variables for the inialization and state determination of the AMC13 within the xDAQ environment prior to taking a run. These...
Update Firmware using `p flash.py` First, download and install the latest AMC13Python tarball found here. This latest release will contain the latest firmware...
Below are the releases of the standalone, non xDAQ C software for the AMC13. This software requires a CACTUS installation on the host machine. If you have installed...
Charlie`s Acronym List $ ADC: Analog to Digital Converter $ AMC: Advanced Mezzanine Card. An electronics module which mounts in an ATCA or MicroTCA crate...
The DCC2 is intended to be plug compatible with the DCC1. There are some hardware differences: DCC2 occupies the right slot covered by the front panel, while...
HTR to DCC2 links use National DS90CR285/286 Channel Link technology. These are in principle 28 bit links but we only use 24 of them. The low level link format is...
This page contains information about work towards integration of the uHTR firmware with the AMC13 link done at BU. It will likely become quickly out of date once...
AMC13 Address Tables The ones here are out of date. The latest ones are always in CVS here or included with a recent HCAL xDAQ release. Spartan v01 Virtex...
The HCAL XDAQ C software package for the AMC1`3 may be found here: http://isscvs.cern.ch/cgi bin/viewcvs.cgi/TriDAS/hcal/hcalUpgrade/amc13/?root tridas JimRohlf...
C Tool 9 May 2012 (1.44) cout read spartan (virtex) TTC n times` single read spartan (virtex) n words from add` read spartan (virtex) by register name` block...
Hi All, There has been a major change to the AMC13 firmware which allows: 1. reloading new firmware from flash without power cycling the crate, 1. storage of...
Feb 16 17, 2012 INDICO: https://indico.cern.ch/conferenceDisplay.py?confId 178104 Friday Tentative plan is to develop the system to the block diagram level for...
This page is a (temporary) home for a CMS track trigger project, which is currently a collaboration between Fermilab, Brown University and Boston University. Meetings...
Feb 16 17, 2012 INDICO: https://indico.cern.ch/conferenceDisplay.py?confId 178104 Friday Tentative plan is to develop the system to the block diagram level for...
Please log test activity here: AMC13DebugLog Test Firmware Current AMC13 firmware as of 20 Jan 2012 supports TTC distribution plus demonstration DAQ link transmit...
Final documentation should be kept on the Countinghouse Page. BU Private TWiki page for DCC2 is HERE. Evolving documentation is on this page of the BU TWiki....
This page contains documentation and firmware to provide an Ethernet endpoint for control and readout of devices implemented using FPGAs. The specification and original...
Summer 2010 SiPM Testing This page contains documentation on testing of various SiPM devices during Summer 2010 at BU. We received a shipment of 3 devices in Feb...
A workshop was held at Brown on July 15 16 2009. Participants were Marvin Johnson and Ron Lipton (Fermilab); Meenakshi Narain and Ulrich Heintz (Brown); Eric Hazen...
2009.05.26 All histograms added with weights. Resulting summed .root file: WeightedSumsRealWeights.root: WeightedSumsRealWeights.root 2009.05.25 One trigger...
If you see any funny behavior related to a DCC2 during a run, please try to do the following to capture information for debugging: stop the L1A but do not destroy...
2009 04 16 Yet another version 14400, this one dated 13 Apr 2009 17:08. Program into HTR in slot 21 top bottom. Cable to DCC1 in slot 19, spigots 0, 1. Reprogramming...
This page contains evolving documenation for the new HCAL VME DCC. It is intended that the latest available versions are kept here during development. DCC2 Hardware...
BUCMSPublic Web Preferences The following settings are web preferences of the BUCMSPublic web. These preferences overwrite the site level preferences...
This is a subscription service to be automatically notified by e mail when topics change in this 1 web. This is a convenient service, so you do not have to come...