This page contains a table of method declarations and descriptions for the AMC13 env C Class. Enumerations Enum Typedef Enum Description IPbusVersion...
Below is the official configuration bytes sent by the MMC to the AMC13 via the SPI interface. For a more detailed look at the MMC FPGA SPI interface, see the of Wisconsin...
How to log on to 904 hcal904daq01 is in a brand new, not yet fully configured private network of B 904. To log in you should first log onto lxplus.cern.ch and then...
2013 05 29 hazen Build MMC v2.1 from tom using default settings in AVR studio 6.1 and flash. Payload power comes on, MMC messages look ok but can`t ping at jumper...
The TTT firmware is developed and maintained by Christopher Woodall (chris.j.woodall #64;gmail.com). The MCS files and source can be found at the following link:...
In order to access your device using a JTAG USB interface, you need to make sure that the cable is correctly connected and that there is a live AMC13 which the iMPACT...
amc13 control.py Documentation Notes The primary purpose of this AMC13 python tool is to talk to the board and carry out simple debugging procedures. However...
The following table contains configurable variables for the inialization and state determination of the AMC13 within the xDAQ environment prior to taking a run. These...