Recent Changes in BUCMSPublic Web retrieved at 15:04 (GMT)

THIS MANUAL IS INCOMPLETE but what is written here should be more accurate and up to date than the old `functional specification`. Please e mail me if you find mistakes...
NAT MCH We have an NAT MCH in one of our cates. It is at 192.168.1.41 in our setup. You can telnet to it and you`ll be connected to a command line utility with many...
AMC13 Test edit (this page) ...
To Do 2018 01 25 (djarcaro) The flash programming incorrectly selects an address when the name is slightly off. Example below: Using a FW file called AMC13T2Goldenv0xfff...
This page describes the production AMC13 C support software. The software is in cactus here: Current tags: browse AMC13SoftwareHistory svn co svn ssh://svnuser...
In progress 2015 01 07 In order to distribute bug fixes and software updates to the users of the AMC13, we need to generate a new tag on the cactus svn and generate...
AMC13Tool2 is a command line utility designed to exercise all functions of the AMC13. The tool can be run in either interactive or scripted mode. Usage: AMC13Tool...
AMCT Python Software AMCT Purpose The goal is to develop a set of routines to automatically (i.e. without human intervention) test AMC13 hardware using python language...
This page describes new (as of early 2015) python bindings to the AMC13 software. This is very much a work in progress, but at least one demo program now works. See...
The AMC13 requires at least one SFP in the bottom site (for TTC) and typically 1 3 different type SFP in the upper 3 sites for DAQ. See sketch below. The TTC SFP...
AMC13 0x6052 Testing AMC13 0x24e 0x4049 Testing For all tests below, should check the following: Status display OK Dump all registers using Eric`s...
Bugs Found LINK OK not 1 for all links in fake mode AMC Links AMC01 AMC02 AMC03 AMC04 AMC05 AMC06 AMC07 AMC08 AMC09 AMC10 AMC11 AMC12...
Useful Links Files iMPACT Installation Running iMPACT iMPACT Troubleshooting amc13T2v0x19.bit (LX25T only) Flash Layout All Flash memory programming...
AMC13 Bench Test Instructions 1. Test Fixture a. Power up Test and MMC Programming a. Install the module in the bench test fixture with power off a. Power...
Firmware Versions Please see Database for current versions. Any firmware combinations not posted there are not supported! If for some reason your firmware file is...
Links below for uHTR firmware pages. To check out a specific revision use e.g: $ svn co r 4209 svn ssh://your username@svn.cern.ch/reps/cms firmwsrc/hcal/uhtr/trunk...
This page contains some uHTRTool software procedures which are useful to an AMC13 debugger and developer. Contents Program uHTR Flash Enable uHTR DAQ...
These instructions assume you have successfully installed and tested your software. See AMC13CppGettingStarted for instructions if you haven`t Actions...
DTCManager HyperDAQ Pages Point 5 miniDAQ Peek uHBHEa (24) 1102 (20) http://hcalutca01.cms:16612/urn:xdaq application:lid 51/Peek 1104 (21) uHBHEb...
To connect to an HCAL uTCA crate a P5 (as of 2016 04 13): $ ssh lxplus.cern.ch (CERN login) $ ssh cmsusr $ ssh hcalutca01 $ ~hcalsw/bin/AMC13Tool2 wu.sh...
The AMC13 register set (and associated uHAL address table) is complex. This page attempts (will attempt!) to document it. The address table files are used for access...
Proposed new database and versioning system for AMC13 firmware. Version numbers Currently we have many AMC13FirmwareFlavors each with their own range of version...
Testing 0x4049 en 1 12 f t lt 1000 10 st Board FED SERIALNO T1 VER T2 REV T2 SERNO INFO...
AMC13 IP and MAC Address Assignment The AMC13 has two PCB Tongues. Tongue 1 (T1) and Tongue 2 (T2) each has their own FPGA (Virtex6/Kintex7 for T1, Spartan6 for T...
Actions Enable Backplane Read TTC Clock PLEASE NOTE: These are instructions for users who have an understanding of the Building 28 system and of the AMC13Tool...
Eric, 0x24a has implemented the double buffering of monitor counters. Registers 0x0, 0x3, 0x4, 0x5, 0x2c and 0x30 0x59(resync counter has been moved from bit 31...
We`re starting to think about a successor to AMC13 for ATCA. There have been some complaints about the place holder name `Blade13`. PLEASE SUGGEST new names on this...
Here is a summary table of the current AMC13 firmware variants: T1 Version Compatible Hardware Use 0x200 up AMC13XG with XC7K325T FPGA general...
AMC13 to AMC Backplane Link We have developed firmware to assist AMC module developers in communicating with the AMC13. The current version (as of May 2014) is documented...
Links to other useful firmware https://svnweb.cern.ch/trac/cactus/browser/tags/ipbus fw https://svnweb.cern.ch/cern/wsvn/cms firmwsrc/cms tcds/ https...
Each AMC13 as shipped is a 3 board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed...
Each AMC13 has a hardware serial number determined by solder jumpers on the T2 board (8 bits 1 9th bit). This number determines the MAC address, and is therefore...
Programming AMC13 Flash with AMC13ToolFlash These instructions are for initial programming of the AMC13 or for recovery of AMC13 after flash has been corrupted. This...
New analysis code being developed for 2014 data format New code is being developed by Daniel Arcaro with help from Eric Hazen and Dan Gastler to analyze the new/final...
AMC13 Debugging Hints My AMC13 is plugged in but I can`t contact it! Check sensor info (NAT MCH) If you have an NAT MCH, you can learn a lot about the state of your...
The details of this depend on the facilities available. Generally the possible values we might want to generate alarms on fall into the following categories:...
AMC13 DAQ Firmware This page is the `home` for documentation of a common firmware developed to suit many users of the AMC13. UpdatedDAQPath.pdf Data Format...
Some ideas on AMC13 HyperDAQ code structure. Currently have amc13::Status with Report() and set/get methods for HTML, BareHTML and LaTeX. Suggest the following...
Tags 1.1.5 Increment makefile rev Add AMC13::getL1AHistory() for new L1A history at 0x100 Update address table Add l1a command to AMC13Tool2 to display...
AMC13XG Board Revision File Link Notes T1 V0.2 As produced for S/N up to S/N 112 Photos: Front http://ohm.bu.edu/~hazen/CMS/AMC13/Rev2/Photos...
Welcome to the 1 web Available Information CharliesHcalElectronicsAcronymList HCAL Electronics CMSPrivateNetwork HOWTOs for accessing machines at 904 and...
NAT MCH Firmware Notes by Mark Dobson (copied from CERN Twiki) The majority of NAT MCHs came with firmware version V2.15 which is very buggy. There issues with powering...
The following are instructions on how to install the Xilinx LabTools iMPACT software on an SLC5 machine. This procedure can be generalized to the Red Hat Linux distribution...
Getting started with new AMC13 software: 1. Install SLC6 OS and Cactus tools on your computer. install install 2. Check out AMC13 software package and build...
Everything on this page is OBSOLETE . See AMC13CppProductionSoftware . This page describes `Legacy` C software for the AMC13. The intention is that new users...
AMC13 MMC Software The AMC13 MMC software package can be found in the amc13/dev tools/amc13Config directory in the amc13 svn, amc13config directory in the xDAQ...
Flash Programming The AMC13 flash memory is divided into 4 regions as follows: NOTE: Table needs to be updated with new firmwares Offset Name File Name...
Everything here is OBSOLETE. This code will no longer work as the underlying libraries don`t work with IPBus firmware any more. Releases amc13 python noTests...
AMC13 Tool Acquisition and Installation This software is OBSOLETE. Please see AMC13CppProductionSoftware for information on the new software. Current code is...
High Rates Test Procedure Test procedure for building events from uHTR, while using TTT as TTC source. Test procedure assumes certain tools are available, namely...

«Previous   1  2  3   Next»

Show 10, 20, 50, 100, 500, 1000 results per page, or show all.

Related topics: RSS feed, rounded corners RSS feed, ATOM feed, WebNotify, site changes, site map

Edit | Attach | Watch | Print version | History: r4 < r3 < r2 < r1 | Backlinks | Raw View | Raw edit | More topic actions
Topic revision: r4 - 15 Nov 2006 - TWikiContributor
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2018 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback