(Under construction) This page covers the steps to reprogram the MMC in the AMC13.

Software Prerequisites

  1. AVR/Atmel Studio (newer MMC's may require the use of Atmel Studio 6.1 or higher)
  2. PuTTY


  1. Make sure you have the most recent firmware for the MMC, which can be found in the AMC13 Related Documents link on the main page (this link location susceptible to change). For the purpose of examples, for the remainder of this page, I will assume the use of AMC13_v2.1.zip.
  2. Connect AVR device into USB port on computer and into MMC port on AMC13.

-- DavidZou - 29 May 2013

Edit | Attach | Watch | Print version | History: r14 | r4 < r3 < r2 < r1 | Backlinks | Raw View | Raw edit | More topic actions...
Topic revision: r2 - 29 May 2013 - DavidZou
  • Edit
  • Attach
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2022 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback