10 Prototype boards with red front panels were manufactured in early 2009. These boards are not identical to the production boards because they have a smaller FPGA. The production front panels are marked "DCC2" and are black.

Boards are numbered in decimal starting with 2001 for the first prototype up to a maximum possible number of 2255. The first digit is always '2'. The other three digits represent the decimal equivalent of the binary value set by cutting jumpers on the PCB.

You can find out which board is where in the pit as follows:

(log on to a head node, i.e. cmsusr1 etc)

$ cd ~ehazen/GetStatus
$ ./getAllVersions.sh | ./parseVersions.pl

 Crate  Bus    Slot   Xilinx     LRB        VME    S/N  FED
 ====================================
     4  caen:0 10     0x3018     0x010a     0x0104 2001 700
     4  caen:0 20     0x3018     0x010a     0x0104 2002 701
     0  caen:1 10     0x3018     0x010a     0x0104 2174 702
     0  caen:1 20     0x3018     0x010a     0x0104 2176 703
       .... remainder of list truncated ...

Prototype Boards

S/N	Location	Notes
2001	???	Tested in MWGR 15
2002	???
2003	CERN - Bat 28 - cmsmoe6
2004	CERN - Bat 904 - cmsmoe4
2005	BU - Test stand
2006	Whitman	To be destructively tested for soldering temperature profiles
2007	BU	Ethernet resistor replaced - re-test
2008	BU	Ethernet resistor replaced - re-test
2009	BU	Tested. No errors
2010	BU

Production Boards

The production board serial numbers start with 2129 as shown below. On the PCB, the binary "jumpers" (actually cut traces) start with "10000001".

S/N	Location	Notes	Date shipped
2129	FED_730	Tested.	5/26
2130	CERN	Tested.	5/26
2131	FED_720	Tested.	5/26
2132	FED_718	Tested.	5/26
2133	FED_729	Tested.	5/26
2134	CERN	Tested.	5/26
2135	FED_724	Tested. HTR13 LED broken. Now fixed.	5/26
2136	CERN	Tested.	5/26
2137	FED_725	Tested. Initially 2 errors. 2nd time tested-no errors. Probably a wiring issue.	5/26
2138	FED_726	Tested.	5/26
2139	CERN	Tested.	5/26
2140	FED_728	Tested. Initially 2 errors. 2nd time tested-no errors. Probably a wiring issue.	5/26
2141	FED_723	Tested.	5/26
2142	FED_727	Tested.	5/26
2143	BU	Tested. Ethernet error(RJ 45). Was not fixed.	Accidentally shipped 5/26
2144	FED_722	Tested.	5/26
2145	FED_719	Tested.	5/26
2146	BU	Tested. Pin9 of HTR14 RJ45 to U14 line open. Could be a PCB problem.
2147	BU	Tested. Two broken LEDs, Ethernet error(RJ 45), and CRC error. R25 cold solder,D25 is also missing. Errors fixed as of 6/3
2148	FED_721	Tested.	5/26
2149	BU	Tested. U0 soldering problem(most likely because U10 looks OK) Multiple lines to U10 without connection
2150	CERN	Tested.	7/1
2151	CERN	Tested.	6/1
2152	FED_701	Tested.	6/1
2153	CERN	Tested.	6/1
2154	CERN	Tested.	6/1
2155	CERN	Tested.	6/1
2156	FED_714	Tested.	6/1
2157	CERN	Tested.	6/1
2158	FED_710	Problem: DSP FW version 0x301c reports as version 0x0 on this board. Can program manually with DCC2Tool.exe w/o issues. CRC of DSP FW reported by DCC2Tool.exe is correct.	6/1
2159	CERN	Tested.	6/1
2160	FED_700	Tested.	6/1
2161	FED_708	Tested.	6/1
2162	FED_716	Tested.	6/1
2163	FED_709	Tested.	6/1
2164	FED_715	Tested.	6/9
2165	FED_711	Tested.	6/9
2166	FED_731	Tested.	6/9
2167	BU	Tested. Spigot CRC error/SLINK error
2168	FED_707	Tested.	6/9
2169	FED_706	Tested.	6/9
2170	BU	Tested. CRC errors. Spigot zero bad?
2171	FED_717	Tested.	6/9
2172	FED_704	Tested.	6/9
2173	FED_705	Tested.	6/9
2174	FED_702	Tested.	6/9
2175	BU	Tested. Broken LED-->VME.
2176	FED_703	Tested.	6/9
2177	CERN	Tested.	7/1
2178	CERN	Tested.	7/1
2179	BU	Tested.
2180	BU	Tested. TTS link error. SLINK error.
2181	CERN	Tested.	7/1
2182	CERN	Tested.	7/1
2183	BU	Tested.
2184	BU	Tested. CRC error, SLINK error. "event size of 4800 words is unreasonable"
2185	BU	Tested.
2186	BU	Tested.
2187	BU	Board is warped. won't fit into crate.
2188	BU	Tested. Ethernet RJ45 error.
2189	BU	Tested.
2190	BU	Tested.
2191	BU	Tested.
2192	BU	Tested.
2193	BU	Tested.
2194	BU	Tested.
2195	BU	Tested.
2196	BU	Tested.
2197	BU	Tested.

EricHazen - 15 Apr 2009

Changes: Logged in today and found FED 700 is now S/N 2160 (was previously 2001), FED 701 is now S/N 2152 (was previously 2002) Problem with FED 710 & DSP FW 0x301c described above.

-- PhilLawson - 26 Aug 2009