10Gb/s DAQ

• AFBR-703SDZ from Avago ($120). EOL as of 2/2014
• AFBR-709SMZ is a replacement, same price

5Gb/s DAQ

For the high-speed (SFP+) transceivers, we suggest HP AJ716A 8Gb Fibre Channel SFP+ transceiver. We bought a couple from serversupply.com ($85 each or so). These are 850nm MMF Duplex LC connector type.

160/400Mb/s TCDS

After LS1 CMS will replace TTC hardware with TDCS. This will use TTC protocol for downstream compatible with existing system, but new 400MB/s 8b10b protocol for upstream.

As of this writing we are still selecting a new SFP to use but here are some candidates:

Manufacturer	Part No	Price/Availability	Speed	Notes
Finisar	FTLF1318P3BTL	USD 65 / Stock	Gigabit Ethernet up to 1.25Gb/s
Finisar	FTLF1321P1BTL	USD 95 / Stock	Up to 2.67Gb/s
JDSU	JSH-12L1DD1	USD 38 / 4 weeks		Recommended by Jan Troska

160Mb/s TTC

For the TTC receiver, we use an SFP 155-Mbps 1300nm transceiver. Suppliers:

• LFP105 from blackbox.com ($70 each) – Discontinued as of June 2012
• HFBR-57E0LZ from Avago (Digi-Key has them).

Cables are 62.5u multimode ST-LC type

We have shipped several AMC13 with the Black Box ST/LC cable (3m) P/N: EFN110-003M-STLC.

NOTE: these are all obsolete with the commissioning of the TCDS system

SFP Inventory