Flash Programming

Need to essentially port this C++ code (DCC2Programmer.cc) to Python.

Registers accessed in VME code in table below. See Wu's documentation for details of the VME registers, which will be very similar to the ones on AMC13 accessed through IPbus.

Name VME addressSorted ascending Description
VME_csr_serial 0x10 bits 31:16 Board serial number
VME_csr_addr 0x10 Status/control register (see documentation)
F_wbuf_addr 0x800-0x8ff flash write buffer
F_rbuf_addr 0xa00-0xaff flash read buffer
F_cmd_addr 0x100 flash command register

Handy Links

-- EricHazen - 06 Dec 2011

This topic: BUCMSPublic > WebHome > HcalDTC > AMC13FlashProgramming
Topic revision: r1 - 06 Dec 2011 - EricHazen
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback