Getting started with new AMC13 software:

1. Install SLC6 OS and Cactus tools on your computer.

- SLC6 install

- Cactus install

2. Check out AMC13 software package and build:

    $  svn co svn+ssh://   
    $  cd amc13
    $  source   # or possibly .csh
    $  make                # possibly needed twice first time

      (substitute your CERN user name for svnuser)

3a. Create a connection file for your board. You need to know the IP addresses (two, for T1 and T2). By default they are:

    T1:  192.168.1.x    where x = 255-2*SN
    T2:  192.168.1.y    where y = 254-2*SN
SN is the serial number from the front of the module. There are other ways to set the IP addresses; let me know if you can't use the default ones.

There are a sample connection files:

        amc13/etc/amc13/connectionSN43.xml          (not using control hub)
        amc13/etc/amc13/connectionSN43_ch.xml       (using control hub)
Please copy the appropriate one and edit it to match your AMC13.

3b. (Alternatively) you can run the tool to specify the IP address of your AMC13 on the command line:

AMC13Tool2.exe -c -p ~/work/amc13/amc13/etc/amc13

See Documentation for details.

4. Run the AMC13Tool2 as follows:

    $ tools/bin/AMC13Tool2.exe -c amc13/etc/amc13/connectionSN43.xml
    Using AMC13 software ver:30304
    Connected AMC13s
    *0: SN:  43 T1v: 0209 T2v: 0021 cf: amc13/etc/amc13/connectionSN43.xml

Assuming you get to this point and you get a display of firmware versions and serial number which make sense, you are in good shape!

-- EricHazen - 04 Sep 2014

Edit | Attach | Watch | Print version | History: r8 < r7 < r6 < r5 < r4 | Backlinks | Raw View | Raw edit | More topic actions...
Topic revision: r5 - 24 Jun 2015 - EricHazen
  • Edit
  • Attach
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2022 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback