Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.

Information on newest boards (SN48 and larger) are now located in a new board database: VIEW link

Serial Number Range	Used	Count	Board Type/Rev	Notes
47	0	1		Unused but see note [1]
21-31	0	11		Could be used but see note [1]
1-12	12	12	V1 with Virtex-6 LX 130T and Spartan-6
32-46	15	15	V2 with Kintex-7, LX 150T Spartan 6 (lx25t)
113-127 and 129-159	0	46		Reserved for future BU production
16-20	5	5	V1 with Virtex-6 LX 240T
48-112	65	65	V2 with Kintex-7, LX 240T Spartan 6 (lx45t)	2014 Production of 65
257-321	65	65	V2 with Kintex-7 LX240T Spartan 6	BU production of 65 in 2015
160-254	?	95	V2 with Kintex-7, LX240T Spartan 6	CERN Production of up to 95
255-256				Don't use
322-383				Reserved for BU
384-511				CERN 2015 Production continued

Notes:

[1] Software expects serial numbers below 48 to use LX150T Spartan chip; to support newer modules in these serial numbers would require updated software.

See AMC13PartNumbers and barcode labels for details on part numbers and barcode labels.

Production I -- 2014

Run of 50+15 boards with New T2. Modules beginning with S/N 51 have matching S/N on all 3 boards when initially assembled.

See Database for boards above S/N 48.

AMC13XG with Kintex-7

Serial No	Status	MMC Rev	Firmware Rev	Location	Notes	Computer
32 (0x20)	HW Tested	2.0	T1: 0x84 T2: 0x15	UMN	FW currently broken (IPbus issue)
33 (0x21)	HW Tested	2.1	T1: 0x103 T2: 0x19	BU	(2014/04/09) Currently out of Commission, T2 removed, replaced w/ 49 T2 (2/28/14). T3 reattached (after Clock Tests), (2/14/14 Working and Tested)
34 (0x22)	HW Tested	2.1	T1: 0x8d T2: 0x17	BU	T1 taken to replace in S/N 94 (T2 no longer used)
35 (0x23)	HW Tested	2.0	T1: 0x84 T2: 0x17	UW Madison	FW currently broken (IPbus issue)
36 (0x24)	HW Tested	2.0	T1: 0x86 T2: 0x17	Imperial College	FW currently broken (IPbus issue)
37 (0x25)	Some HW Problems		T1: 0x1c T2: 0x17	BU, EDF	Eric is using as model for placing labels. IP address is assigned, read, and pinged. But AMC13Tool cannot connect (Working, 3/3/14, using SN34 T1 and SN37 T2 board). T1 of 37 is now with new T2 board (serial num 50). Handle mechanism fixed. FPGA Unconfigure after update to 0x89 firmware (2/10/2014 - Now has T1: 0x102 T2:0x19 firmware and experiencing memory problem)
38 (0x26)	HW Tested	2.0	T1: 0x87 T2: 0x17	CERN	FW works at 2.5 Gb/s backplane link speed
39 (0x27)	HW Tested	2.1	T1: 0x92 T2: 0x17	BU	Received back from Cornell 2014/04/15,Ship to Cornell 7/30/13, returned to BU capacitor on T2 replace and hand carried back to Cornell by Nic (after testing). Still at BU 2/3/15?
40 (0x28)	HW Tested	2.1	T1: 0x103 T2: 0x19	Kentucky	(2/14/14 Working and Tested)
41 (0x29)	HW Tested	2.1	T1: 0x8d T2: 0x17	CERN	Ship 7/29/13 to Magnus c/o Laza
42 (0x2a)	HW Tested	2.1	T1: 0x103 T2: 0x19	BU	Sent to Tim Gorringe (G-2) (2/14/14 Working and Tested)
43 (0x2b)	HW Tested	2.1	T1: 0x1f T2: 0x107	BU	Has rarp-enabled firmware, debugging problems w/ rarp. Working (12/13), T3 reattached (after Clock Tests) , swapped parts w/ SN 39 for testing. SN 43 front panel attached to SN43 T1 and SN39T2. SN43 T2 in bag labelled SN43
44 (0x2c)	HW Tested	2.1	T1: 0x8d T2:0x17	CERN	Ship 7/29/13 to Magnus c/o Laza , experiencing problems communicating w/ board
45 (0x2d)	HW Tested	2.1	T1:0x94 T2: 0x17	CERN	Ship 10/1/13 to CERN, Laza
46 (0x2e)	HW Tested	2.1	T1:0x8d T2: 0x17	Bristol

Notes on previous S/N 34:

Disassembled (prev at cornell) Won't power up? (Testing, 8/6/2013) Problem seems to be in T1 board. Swapped parts w/ SN 43 for testing. SN34 T2 w/ the SN43 T1 seems to work. SN34 T1 w/ SN43 T2 exhibiting same problems. (Currently disassembled in EDF 2/10/14)

Boards with Virtex-6 LX130T

Serial No	Status	Firmware Rev	Location	Notes	Computer
1	Tested OK	S=0x11 V=0x25	CERN for Calcutta	Retest 8/31/12
2	?	?
3	Tested OK	S3	UFL	Retest 8/31/12 (LED issue?). 9/9/13 in U Florida with Cody Reeves
4	Tested OK	S3	BU Crate	Retest 8/31/12
5	Tested OK	S3	Vienna (GT)	shipped to Vienna Feb2012
6	Tested OK	S6 V3	40-2B0-01	Delivered 22-Jan-2012 to D. Gigi with 3xSFP, fibers[1]	pcphcmd01.cern.ch
7	Tested OK	S=0xb V=0x10		ship to GEM group 2012-07-26 (Brussels)
8	Tested OK	?	Minnesota	Shipped 24-Jan-2012 to UMN [2]	cmslab1.spa.umn.edu
9	Fail	?	BU
10	Tested OK	S6 V3		shipped to CERN Feb2012	hcaldaq12 (P5)
11	Tested OK	S3, S=0x17 V=0x25		shipping to CERN Feb2012, "AMC13 s/n 11 to the Meyrin site, and will bring it to Tina on Tuesday, for shipment to FNAL" Aug 1, 2013	in 904?
12	Tested OK	2012-01-21	Imperial	Delivered 22-Jan-2012 to G. Iles with 3xSFP, fibers[1], moved to Imperial College	heppc209.hep.ph.ic.ac.uk

Boards with Virtex-6 LX240T

Serial No	Status	Firmware Rev	Location	Notes	Computer
16	Tested OK	S=0xb V=0xf	UW	Shipped to MSN 7/25/12	daq@login.hep.wisc.edu then daq@ayinger.hep.wisc.edu
17	Tested OK	S=0xb V=0xf	UW	Shipped to MSN 7/25/12
18	Tested OK	S=0xb V=0xf	UW	Shipped to MSN 7/25/12
19	Tested OK	S=0x17 V=0x2a	BU	T1 has power supply problem (2014/06/04), productiontest errors 6/18/13, Retest 8/31/12
20	Tested OK		BU? Not in CMS Lab

Two more boards shipped to DESY and Rice in Nov 2012.

Notes:

[1] Module delivered with two 8Gb/s HP SFP and one 160Mb/s low speed SFP, plus one TTC fiber and one high-speed fiber.

[2] Shipped with 160Mb/s low speed SFP only plus TTC and high-speed fibers

Version which is critical is the T2 (Spartan) as it provides the flash update interface. Version 6 (S6) is the first version with the "final" flash layout with golden (backup) configuration. Modules with a T2 version earlier than S6 can be updated first by programming S6 to flash address 0x0 (may require older software) and then using the current software to program the Header (0x0), Golden (0x100000), Spartan (0x200000), and Virtex (0x400000). One this is done, new firmware may be loaded from the flash by software command without power cycle.

Inventory of SFPs in BU CMS Lab

-- EricHazen - 19 Jun 2015