(r35) AMC13BoardDatabase < BUCMSPublic

Tags: view all tags
     Each AMC13 as shipped is a 3-board stack (T1, T2, T3).  The serial number is set by soldered jumpers on the T2 board (8  bits).  For now, the serial number is written on the front panel with a marker and is a small integer.

*AMC13XG with Kintex-7*

| *Serial No* | *Status* | *MMC Rev* | *Firmware Rev* | *Location* | *Notes* | *Computer* |
| 32 (0x20)   |   HW Tested   | 2.0  | T1: 0x84 T2: 0x15   |   UMN   |  FW currently broken (IPbus issue)   |                    |
| 33 (0x21)   |   HW Tested   | 2.1  | T1: 0x8a T2: 0x17   |     BU        |              |                    |
| 34 (0x22)   |   (HW Issues)           | 2.1  |                      |     BU                   |  Bizzare problems (see test log)                |   |
| 35 (0x23)   |   HW Tested   | 2.0 |  T1: 0x84 T2: 0x17   |   UW Madison   |   FW currently broken (IPbus issue)   |                    |
| 36 (0x24)   |   HW Tested   | 2.0 |  T1: 0x86 T2: 0x17   |   Imperial College   |   FW currently broken (IPbus issue)   |                    |
| |||||||
| 37 (0x25)   |              |       |                    |      BU       |              |                    |
| 38 (0x26)   |   HW Tested   | 2.0 |  T1: 0x87 T2: 0x17    |     CERN        | FW works at 2.5 Gb/s backplane link speed           |                    |
| 39 (0x27)   |   HW Tested   | 2.1 |  T1: 0x87 T2: 0x17   |   Cornell                  |    Hand carried via FNAL by Eric                |    |
| 40 (0x28)   |              |       |                    |     BU        |              |  (has front panel 37 -- this is likely a mistake that will be corrected)                  |
| 41 (0x29)   |   HW Tested   | 2.1 |  T1: 0x8a T2: 0x17    |     BU        |   Can successfully run production test consecutively w/o handle reset            |                    |
| |||||||
| 42 (0x2a)   |              |       |                    |     BU        |              |                    |
| 43 (0x2b)   | HW Tested  | 2.1     |  T1: 0x8a T2: 0x17                 |     BU        |              |                    |
| 44 (0x2c)   | (HW Issues)         | 2.1      |                    |     BU        |    More Bizzare problems (see test log)          |                    |
| 45 (0x2d)   | HW Tested             | 2.1     |   T1:0x8a T2: 0x17                 |     BU        |  Can successfully run production test consecutively w/o handle reset          |                    |
| 46 (0x2e)   | HW Tested             | 2.1     |   T1:0x8a T2: 0x17                 |     BU        |              |                    |


*Boards with Virtex-6 LX130T*

| *Serial No* | *Status* | *Firmware Rev* | *Location* | *Notes* | *Computer* |
| 1 | Tested OK | S=0x10 V=0xd | CERN for Calcutta | Retest 8/31/12 |  |
| 2 | ? | ? | | | |
| 3 | Tested OK | S3 | BU Crate | Retest 8/31/12 (LED issue?) | |
| 4 | Tested OK  | S3 | BU Crate | Retest 8/31/12 | |
| 5 | Tested OK | S3 | Vienna (GT) | shipped to Vienna Feb2012 | |
| 6 | Tested OK | S6 V3 | 40-2B0-01 | Delivered 22-Jan-2012 to D. Gigi with 3xSFP, fibers[1] | pcphcmd01.cern.ch |
| 7 | Tested OK | S=0xb V=0x10 | | ship to GEM group 2012-07-26 (Brussels) | |
| 8 | Tested OK | ? | Minnesota | Shipped 24-Jan-2012 to UMN [2] | cmslab1.spa.umn.edu |
| 9 | Fail | ? | BU  |  | |
| 10 | Tested OK | S6 V3 | | shipped to CERN Feb2012 |hcaldaq12 (P5) |
| 11 | Tested OK | S3 | | shipping to CERN Feb2012 |in 904? |
| 12 | Tested OK | 2012-01-21 | Imperial | Delivered 22-Jan-2012 to G. Iles with 3xSFP, fibers[1], moved to Imperial College | heppc209.hep.ph.ic.ac.uk |

*Boards with Virtex-6 LX240T*

| *Serial No* | *Status* | *Firmware Rev* | *Location* | *Notes* | *Computer* |
| 16 | Tested OK | S=0xb V=0xf | UW | Shipped to MSN 7/25/12 | daq@login.hep.wisc.edu then daq@ayinger.hep.wisc.edu |
| 17 | Tested OK | S=0xb V=0xf | UW | Shipped to MSN 7/25/12 | |
| 18 | Tested OK | S=0xb V=0xf | UW | Shipped to MSN 7/25/12 | |
| 19 | Tested OK | | BU | Retest 8/31/12 | |
| 20 | Tested OK | | BU | | |

Two more boards shipped to DESY and Rice in Nov 2012.

Notes:

[1] Module delivered with two 8Gb/s HP SFP and one 160Mb/s low speed SFP, plus one TTC fiber and one high-speed fiber.

[2] Shipped with 160Mb/s low speed SFP only plus TTC and high-speed fibers

Version which is critical is the T2 (Spartan) as it provides the flash update interface.
Version 6 (S6) is the first version with the "final" flash layout with golden (backup) configuration.
Modules with a T2 version earlier than S6 can be updated first by programming S6 to flash address 0x0 (may require older software) and then using the current software to program the Header (0x0), Golden (0x100000), Spartan (0x200000), and Virtex (0x400000). One this is done, new firmware may be loaded from the flash by software command without power cycle. 

-- Main.EricHazen - 24 Jan 2012, appended J. Rohlf 26 May 2012
Topic revision: r35 - 11 Jun 2013 - DavidZou