Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). On AMC13XG the serial number is printed on the front panel label in decimal.

AMC13XG with Kintex-7

Serial No	Status	MMC Rev	Firmware Rev	Location	Notes	Computer
32 (0x20)	HW Tested	2.0	T1: 0x84 T2: 0x15	UMN	FW currently broken (IPbus issue)
33 (0x21)	HW Tested	2.1	T1: 0x8a T2: 0x17	BU	T3 reattached (after Clock Tests)
34 (0x22)	HW Tested	2.1	T1: 0x8d T2: 0x17	Cornell	Ship to Cornell 7/30/13
35 (0x23)	HW Tested	2.0	T1: 0x84 T2: 0x17	UW Madison	FW currently broken (IPbus issue)
36 (0x24)	HW Tested	2.0	T1: 0x86 T2: 0x17	Imperial College	FW currently broken (IPbus issue)
37 (0x25)	Some HW Problems		T1: 0x87 T2: 0x17	BU	Handle mechanism fixed. FPGA Unconfigure after update to 0x89 firmware
38 (0x26)	HW Tested	2.0	T1: 0x87 T2: 0x17	CERN	FW works at 2.5 Gb/s backplane link speed
39 (0x27)	HW Tested	2.1	T1: 0x87 T2: 0x17	Cornell	Won't power up?
40 (0x28)	HW Tested	2.1	T1: 0x8b T2: 0x17	BU	Currently being used in AMC13 slot--has correct front panel
41 (0x29)	HW Tested	2.1	T1: 0x8d T2: 0x17	BU	Ship 7/29/13 to Magnus c/o Laza
42 (0x2a)	HW Tested	2.1	T1: 0x8a T2: 0x17	BU
43 (0x2b)	HW Tested	2.1	T1: 0x8a T2: 0x17	BU	T3 reattached (after Clock Tests)
44 (0x2c)	HW Tested	2.1	T1: 0x8d T2:0x17	BU	Ship 7/29/13 to Magnus c/o Laza
45 (0x2d)	HW Tested	2.1	T1:0x8a T2: 0x17	BU
46 (0x2e)	HW Tested	2.1	T1:0x8d T2: 0x17	BU	Prepared to ship to Bristol

Boards with Virtex-6 LX130T

Serial No	Status	Firmware Rev	Location	Notes	Computer
1	Tested OK	S=0x11 V=0x25	CERN for Calcutta	Retest 8/31/12
2	?	?
3	Tested OK	S3	BU Crate	Retest 8/31/12 (LED issue?)
4	Tested OK	S3	BU Crate	Retest 8/31/12
5	Tested OK	S3	Vienna (GT)	shipped to Vienna Feb2012
6	Tested OK	S6 V3	40-2B0-01	Delivered 22-Jan-2012 to D. Gigi with 3xSFP, fibers[1]	pcphcmd01.cern.ch
7	Tested OK	S=0xb V=0x10		ship to GEM group 2012-07-26 (Brussels)
8	Tested OK	?	Minnesota	Shipped 24-Jan-2012 to UMN [2]	cmslab1.spa.umn.edu
9	Fail	?	BU
10	Tested OK	S6 V3		shipped to CERN Feb2012	hcaldaq12 (P5)
11	Tested OK	S3, S=0x17 V=0x25		shipping to CERN Feb2012, "AMC13 s/n 11 to the Meyrin site, and will bring it to Tina on Tuesday, for shipment to FNAL" Aug 1, 2013	in 904?
12	Tested OK	2012-01-21	Imperial	Delivered 22-Jan-2012 to G. Iles with 3xSFP, fibers[1], moved to Imperial College	heppc209.hep.ph.ic.ac.uk

Boards with Virtex-6 LX240T

Serial No	Status	Firmware Rev	Location	Notes	Computer
19	Tested OK	S=0x17 V=0x2a	BU	Retest 8/31/12, productiontest errors 6/18/13
20	Tested OK		BU
16	Tested OK	S=0xb V=0xf	UW	Shipped to MSN 7/25/12	daq@login.hep.wisc.edu then daq@ayinger.hep.wisc.edu
17	Tested OK	S=0xb V=0xf	UW	Shipped to MSN 7/25/12
18	Tested OK	S=0xb V=0xf	UW	Shipped to MSN 7/25/12

Two more boards shipped to DESY and Rice in Nov 2012.

Notes:

[1] Module delivered with two 8Gb/s HP SFP and one 160Mb/s low speed SFP, plus one TTC fiber and one high-speed fiber.

[2] Shipped with 160Mb/s low speed SFP only plus TTC and high-speed fibers

Version which is critical is the T2 (Spartan) as it provides the flash update interface. Version 6 (S6) is the first version with the "final" flash layout with golden (backup) configuration. Modules with a T2 version earlier than S6 can be updated first by programming S6 to flash address 0x0 (may require older software) and then using the current software to program the Header (0x0), Golden (0x100000), Spartan (0x200000), and Virtex (0x400000). One this is done, new firmware may be loaded from the flash by software command without power cycle.

-- EricHazen - 24 Jan 2012, appended J. Rohlf 26 May 2012