Each AMC13 as shipped is a 3-board stack (T1, T2, T3). The serial number is set by soldered jumpers on the T2 board (8 bits). For now, the serial number is written on the front panel with a marker and is a small integer.

AMC13XG with Kintex-7

Serial No Status MMC Rev Firmware RevSorted ascending Location Notes Computer
33 (0x21)       BU    
34 (0x22) HW Issues 2.1   BU Bizzare problems (see test log)  
37 (0x25)       BU    
40 (0x28)       BU    
41 (0x29)       BU    
42 (0x2a)       BU    
44 (0x2c) HW Issues 2.1   BU More Bizzare problems (see test log)  
46 (0x2e)       BU    
32 (0x20) HW Tested 2.0 T1: 0x84 T2: 0x15 UMN FW currently broken (IPbus issue)  
35 (0x23) HW Tested 2.0 T1: 0x84 T2: 0x17 UW Madison FW currently broken (IPbus issue)  
36 (0x24) HW Tested 2.0 T1: 0x86 T2: 0x17 Imperial College FW currently broken (IPbus issue)  
38 (0x26) HW Tested 2.0 T1: 0x87 T2: 0x17 CERN FW works at 2.5 Gb/s backplane link speed  
39 (0x27) HW Tested 2.1 T1: 0x87 T2: 0x17 Cornell Hand carried via FNAL by Eric  
43 (0x2b) HW Tested 2.1 T1: 0x89 T2: 0x17 BU    
45 (0x2d) HW Tested 2.1 T1:0x87 T2: 0x17 BU Using T1 0x87 because 0x89 caused errors  

Boards with Virtex-6 LX130T

Serial No Status Firmware Rev Location Notes Computer
1 Tested OK S=0x10 V=0xd CERN for Calcutta Retest 8/31/12  
2 ? ?      
3 Tested OK S3 BU Crate Retest 8/31/12 (LED issue?)  
4 Tested OK S3 BU Crate Retest 8/31/12  
5 Tested OK S3 Vienna (GT) shipped to Vienna Feb2012  
6 Tested OK S6 V3 40-2B0-01 Delivered 22-Jan-2012 to D. Gigi with 3xSFP, fibers[1] pcphcmd01.cern.ch
7 Tested OK S=0xb V=0x10   ship to GEM group 2012-07-26 (Brussels)  
8 Tested OK ? Minnesota Shipped 24-Jan-2012 to UMN [2] cmslab1.spa.umn.edu
9 Fail ? BU    
10 Tested OK S6 V3   shipped to CERN Feb2012 hcaldaq12 (P5)
11 Tested OK S3   shipping to CERN Feb2012 in 904?
12 Tested OK 2012-01-21 Imperial Delivered 22-Jan-2012 to G. Iles with 3xSFP, fibers[1], moved to Imperial College heppc209.hep.ph.ic.ac.uk

Boards with Virtex-6 LX240T

Serial No Status Firmware Rev Location Notes Computer
16 Tested OK S=0xb V=0xf UW Shipped to MSN 7/25/12 daq@login.hep.wisc.edu then daq@ayinger.hep.wisc.edu
17 Tested OK S=0xb V=0xf UW Shipped to MSN 7/25/12  
18 Tested OK S=0xb V=0xf UW Shipped to MSN 7/25/12  
19 Tested OK   BU Retest 8/31/12  
20 Tested OK   BU    

Two more boards shipped to DESY and Rice in Nov 2012.


[1] Module delivered with two 8Gb/s HP SFP and one 160Mb/s low speed SFP, plus one TTC fiber and one high-speed fiber.

[2] Shipped with 160Mb/s low speed SFP only plus TTC and high-speed fibers

Version which is critical is the T2 (Spartan) as it provides the flash update interface. Version 6 (S6) is the first version with the "final" flash layout with golden (backup) configuration. Modules with a T2 version earlier than S6 can be updated first by programming S6 to flash address 0x0 (may require older software) and then using the current software to program the Header (0x0), Golden (0x100000), Spartan (0x200000), and Virtex (0x400000). One this is done, new firmware may be loaded from the flash by software command without power cycle.

-- EricHazen - 24 Jan 2012, appended J. Rohlf 26 May 2012

This topic: BUCMSPublic > WebHome > HcalDTC > AMC13BoardDatabase
Topic revision: r30 - 04 Jun 2013 - DavidZou
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2020 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback