AMC13BoardDatabase < BUCMSPublic

Each AMC13 as shipped is a 3-board stack (T1, T2, T3).  The serial number is set by soldered jumpers on the T2 board (8  bits).  On AMC13XG the serial number is printed on the front panel label in decimal.

Information on newest boards (*SN48 and larger*) are now located in a *new board database*: [[http://db.amc13.info/AMC13/view][VIEW link]] 

| *Serial Number Range* | *Used* | *Count* | *Board Type/Rev* | *Notes* |
| 1-12 | 12 | 12 | V1 with Virtex-6 LX 130T and Spartan-6 | |
| 16-20 | 5 | 5 | V1 with Virtex-6 LX 240T | |
| 21-31 | 0 | 11 | | Could be used but see note [1] |
| 32-46 | 15 | 15 | V2 with Kintex-7, LX 150T Spartan 6 (lx25t)  | |
| 47 | 0 | 1 | | Unused but see note [1] |
| 48-112 | 65 | 65 | V2 with Kintex-7, LX 240T Spartan 6 (lx45t) | 2014 Production of 65 |
| 113-127 and 129-159 | 0 | 46 | | Reserved for future BU production |
| 160-254 | ? | 95 | V2 with Kintex-7, LX240T Spartan 6  | CERN Production of up to 95 |
| 255-256 | | | | Don't use |
| 257-321 | 65 | 65 | V2 with Kintex-7 LX240T Spartan 6 | BU production of 65 in 2015 |
| 322-383 | | | | Reserved for BU |
| 384-511 | | | | CERN 2015 Production continued |

Notes:

[1] Software expects serial numbers below 48 to use LX150T Spartan chip; to support
newer modules in these serial numbers would require updated software.

See [[AMC13PartNumbers]] and barcode labels for details on part numbers and barcode labels.



*Production I -- 2014*

Run of 50+15 boards with New T2.  Modules beginning with S/N 51 have matching S/N on all 3 boards
when initially assembled.

See [[http://db.amc13.info/boards/view][Database]] for boards above S/N 48.

*AMC13XG with Kintex-7*

| *Serial No* | *Status* | *MMC Rev* | *Firmware Rev* | *Location* | *Notes* | *Computer* |
| 32 (0x20)   |   HW Tested   | 2.0  | T1: 0x84 T2: 0x15   |   UMN   | FW currently broken (IPbus issue)   |                    |
| 33 (0x21)   |   HW Tested   | 2.1  | T1: 0x103 T2: 0x19   |     BU        |  (2014/04/09) Currently out of Commission, T2 removed, replaced w/ 49 T2 (2/28/14). T3 reattached (after Clock Tests), (2/14/14 Working and Tested)      |                    |
| 34 (0x22)   |   HW Tested   | 2.1  | T1: 0x8d T2: 0x17   |    BU         | T1 taken to replace in S/N 94 (T2 no longer used)  |   |
| 35 (0x23)   |   HW Tested   | 2.0 |  T1: 0x84 T2: 0x17   |   UW Madison   |FW currently broken (IPbus issue)   |                    |
| 36 (0x24)   |   HW Tested   | 2.0 |  T1: 0x86 T2: 0x17   |   Imperial College   |FW currently broken (IPbus issue)   |                    |
| |||||||
| 37 (0x25)   |   Some HW Problems           |       |    T1: 0x1c T2: 0x17  |      BU, EDF      | Eric is using as model for placing labels. IP address is assigned, read, and pinged. But AMC13Tool cannot connect (Working, 3/3/14, using SN34 T1 and SN37 T2 board). T1 of 37 is now with new T2 board (serial num 50). Handle mechanism fixed. FPGA Unconfigure after update to 0x89 firmware (2/10/2014 - Now has T1: 0x102 T2:0x19 firmware and experiencing memory problem)            |                  |
| 38 (0x26)   |   HW Tested   | 2.0 |  T1: 0x87 T2: 0x17    |     CERN        |FW works at 2.5 Gb/s backplane link speed           |                    |
| 39 (0x27)   |   HW Tested   | 2.1 |  T1: 0x92 T2: 0x17   |   BU                 | Received back from Cornell 2014/04/15,Ship to Cornell 7/30/13, returned to BU capacitor on T2 replace and hand carried back to Cornell by Nic (after testing).  Still at BU 2/3/15?           |    |
| 40 (0x28)   |   HW Tested   | 2.1 | T1: 0x103 T2: 0x19                   |     Kentucky        |   (2/14/14 Working and Tested)            |                |
| 41 (0x29)   |   HW Tested   | 2.1 |  T1: 0x8d T2: 0x17    |     CERN       |Ship 7/29/13 to Magnus c/o Laza       |                    |
| |||||||
| 42 (0x2a)   | HW Tested  | 2.1      |  T1: 0x103 T2: 0x19                |     BU        | Sent to Tim Gorringe (G-2)  (2/14/14 Working and Tested)         |                    |
| 43 (0x2b)   | HW Tested  | 2.1     |  T1: 0x1f T2: 0x107                 |     BU        | Has rarp-enabled firmware, debugging problems w/ rarp. Working (12/13), T3 reattached (after Clock Tests) , swapped parts w/ SN 39 for testing.  SN 43 front panel attached to SN43 T1 and SN39T2. SN43 T2 in bag labelled SN43        |                    |
| 44 (0x2c)   | HW Tested  | 2.1      |  T1: 0x8d T2:0x17              |     CERN        |Ship 7/29/13 to Magnus c/o Laza , experiencing problems communicating w/ board   |                    |
| 45 (0x2d)   | HW Tested             | 2.1     |   T1:0x94 T2: 0x17                 |     CERN        |  Ship 10/1/13 to CERN, Laza         |                    |
| 46 (0x2e)   | HW Tested             | 2.1     |   T1:0x8d T2: 0x17                 |     Bristol        |             |                    |

Notes on previous S/N 34:

Disassembled  (prev at cornell) Won't power up?  (Testing, 8/6/2013)  Problem seems to be in T1 board. Swapped parts w/ SN 43 for testing. SN34 T2 w/ the SN43 T1 seems to work. SN34 T1 w/ SN43 T2 exhibiting same problems.   (Currently disassembled in EDF 2/10/14) 

*Boards with Virtex-6 LX130T*

| *Serial No* | *Status* | *Firmware Rev* | *Location* | *Notes* | *Computer* |
| 1 | Tested OK | S=0x11 V=0x25 | CERN for Calcutta | Retest 8/31/12 |  |
| 2 | ? | ? | | | |
| 3 | Tested OK | S3 | UFL | Retest 8/31/12 (LED issue?). 9/9/13 in U Florida with Cody Reeves | |
| 4 | Tested OK  | S3 | BU Crate | Retest 8/31/12 | |
| 5 | Tested OK | S3 | Vienna (GT) | shipped to Vienna Feb2012 | |
| 6 | Tested OK | S6 V3 | 40-2B0-01 | Delivered 22-Jan-2012 to D. Gigi with 3xSFP, fibers[1] | pcphcmd01.cern.ch |
| 7 | Tested OK | S=0xb V=0x10 | | ship to GEM group 2012-07-26 (Brussels) | |
| 8 | Tested OK | ? | Minnesota | Shipped 24-Jan-2012 to UMN [2] | cmslab1.spa.umn.edu |
| 9 | Fail | ? | BU  |  | |
| 10 | Tested OK | S6 V3 | | shipped to CERN Feb2012 |hcaldaq12 (P5) |
| 11 | Tested OK | S3, S=0x17 V=0x25 | | shipping to CERN Feb2012, "AMC13 s/n 11 to the Meyrin site, and will bring it to Tina on Tuesday, for shipment to FNAL" Aug 1, 2013 |in 904? |
| 12 | Tested OK | 2012-01-21 | Imperial | Delivered 22-Jan-2012 to G. Iles with 3xSFP, fibers[1], moved to Imperial College | heppc209.hep.ph.ic.ac.uk |

*Boards with Virtex-6 LX240T*

| *Serial No* | *Status* | *Firmware Rev* | *Location* | *Notes* | *Computer* |
| 16 | Tested OK | S=0xb V=0xf | UW | Shipped to MSN 7/25/12 | daq@login.hep.wisc.edu then daq@ayinger.hep.wisc.edu |
| 17 | Tested OK | S=0xb V=0xf | UW | Shipped to MSN 7/25/12 | |
| 18 | Tested OK | S=0xb V=0xf | UW | Shipped to MSN 7/25/12 | |
| 19 | Tested OK | S=0x17 V=0x2a | BU | T1 has power supply problem (2014/06/04), productiontest errors 6/18/13, Retest 8/31/12| |
| 20 | Tested OK | | BU? Not in CMS Lab | | |

Two more boards shipped to DESY and Rice in Nov 2012.

Notes:

[1] Module delivered with two 8Gb/s HP SFP and one 160Mb/s low speed SFP, plus one TTC fiber and one high-speed fiber.

[2] Shipped with 160Mb/s low speed SFP only plus TTC and high-speed fibers

Version which is critical is the T2 (Spartan) as it provides the flash update interface.
Version 6 (S6) is the first version with the "final" flash layout with golden (backup) configuration.
Modules with a T2 version earlier than S6 can be updated first by programming S6 to flash address 0x0 (may require older software) and then using the current software to program the Header (0x0), Golden (0x100000), Spartan (0x200000), and Virtex (0x400000). One this is done, new firmware may be loaded from the flash by software command without power cycle. 

| [[AMC13OpticalComponents#SfpInventory][Inventory of SFPs in BU CMS Lab]] |

-- Main.EricHazen - 19 Jun 2015
This topic: BUCMSPublic > WebHome > HcalDTC > AMC13BoardDatabase
Topic revision: r117 - 03 Nov 2020 - EricHazen