Difference: DTCDebugLog (4 vs. 5)

Revision 510 Mar 2010 - EricHazen

Line: 1 to 1
2010-03-10 - Spring break, no notes from Mike, on my own frown
Line: 55 to 55
 Update MCH firmware to latest using update_firmware with nmch_mch.bin file just received. Power-cycle after. MCH comes up ok, but still can't program AVR.
OK, found the problem. The nRESET pin on the AVR is connected to the wrong pin (HUB card reset instead of CLK card reset) on the 28-pin mezzanine connector. If we select '3' (HUB card) then we can program the AVR.
 2010-01-25 - Working with Mike. Tried to connect to NAT-MCH using USB console. Worked once on Mike's vista laptop, then not again.

Try again on L3 XP machine. First time USB device is unrecognized, but observe that Mike has downloaded the nat-mch.inf file. Use the device manager to load this driver file, then it works using teraterm.

This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2022 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback