Difference: DTCDebugLog (23 vs. 24)

Revision 2426 May 2010 - MichaelDimitriyev

Line: 1 to 1
 
META TOPICPARENT name="DTCDesign"
2010-05-20 (Mike)
Added:
>
>
An error is generated everytime we tried to program firmware to the t2's flash. As a result, a new one is being made. In the mean time, I reconnected the old dtc test board to the v3.3 mch to test the write function that I wrote. Now that both the low-level read and write functions (only deal with one register at a time) are operational, I can move on to writing the multi-register versions as well as 32-bit versions.

2010-05-20 (Mike)

 Rolled back to the old firmware -- could not write registers with the new firmware. Safe to write to 0x08, as long as bit 0 is unchanged. Also, successfully removed the front plate from the v3.3 MCH card -- use a screwdriver to pry the plastic handle apart and then pry off the front plate.
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback