Difference: AMC13DebugLog (42 vs. 43)

Revision 4304 Jun 2013 - EricHazen

Line: 1 to 1
Please log AMC13 test activity below, blog style (new entries at top)

2013-06-04 David, Eric, Ben

  • Trying to test S/N 34. Observe that after running Charlie's production test that we can't run it again, and in fact even after power cycling can't ping T1. Try eeperase and mreset on the MMC, still no go!
  • Try the same treatment on S/N 39. Both FPGAs still respond to ping. But the test fails in a different way the 2nd time.
  • Mysteries abound. Could be hardware, MMC or production test software or a combination of them. In any case shipping anything under these conditions seems like a poor idea.

2013-05-30 hazen

  • NAT MCH in crate seems to have died! Symptom was that the Ethernet switch worked (IPBus access to the AMC modules was fine) but couldn't access the MCH by telnet, and the LAN-to-ipmi bridge didn't work. Also, couldn't connect by serial cable to the WinXP machine.
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2020 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback