Difference: AMC13DebugLog (40 vs. 41)

Revision 4110 May 2013 - CharlieHill

Line: 1 to 1
 
META TOPICPARENT name="CmsSlhc"
Please log AMC13 test activity below, blog style (new entries at top)
Added:
>
>

2013-05-10 hill and wu

MMC IPMI commands for reading an AMC13 in slot 3 (IPMB 0x76)

  • Read Spartan Address
       ipmitool -H 192.168.1.11 -U '' -P '' -T 0x82 -b 7 -t 0x76 raw 0x32 0x34 0 0 0 20
       
  • Read Virtex Address
       ipmitool -H 192.168.1.11 -U '' -P '' -T 0x82 -b 7 -t 0x76 raw 0x32 0x34 1 0 0 20
       
  • Write IP Address 192.168.1.100 to SPI Port 0
       ipmitool -H 192.168.1.11 -U '' -P '' -T 0x82 -b 7 -t 0x76 raw 0x32 0x33 0 0 0 11 03 0xff 0xff 00 00 0xc0 0xa8 0x01 0x64 0x00 0x00
       
  • Write IP Address 192.168.1.101 to SPI Port 1
       ipmitool -H 192.168.1.11 -U '' -P '' -T 0x82 -b 7 -t 0x76 raw 0x32 0x33 1 0 0 11 03 0xff 0xff 00 00 0xc0 0xa8 0x01 0x65 0x00 0x00
       
  • Configure Spartan FPGA from SPI 0
       ipmitool -H 192.168.1.11 -U '' -P '' -T 0x82 -b 7 -t 0x76 raw 0x32 0x32 0 0x22
       
  • Configure Virtex FPGA from SPI 1
       ipmitool -H 192.168.1.11 -U '' -P '' -T 0x82 -b 7 -t 0x76 raw 0x32 0x32 1 0x22
       
 

2013-05-03 hill

Procedure for initializing the DAQ Path on the uHTR board and getting it to send data for a module in slot #2 in the uTCA crate:

 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2020 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback