Difference: AMC13DebugLog (105 vs. 106)

Revision 10601 Jul 2014 - AlexGuldemond

Line: 1 to 1
 
META TOPICPARENT name="CmsSlhc"
Please log AMC13 test activity below, blog style (new entries at top)
Added:
>
>

2014-07-1, aguld

Testing boards 51, 52, 68, 72, 78, 79, 83, 94

51: T1 has a short in the power supply. When doing chipscope test with T2, the error counter is changing while it is supposed to remain constant.

52: T1 is working well, T2 was shorted out when the 12V power was turned on.

68: The blue indicator light does not turn off when the handle is released, T2 is good. T2 is currently with S/N 78's T1 and T3. Does not have a T3 with it.

72: T1 is working well. When T2 is used on any working T1, the blue indicator light does not turn off when the handle is pushed in.

78: T1 is good. When T2 is used on any working T1, the blue indicator light shuts off after a few seconds, even when the handle is not pushed in.

79: Board was powered up in test stand with T1 and T2 in the wrong slots. T2 does not work at all, but T1 works fine.

83: T1 works. T2 has a shorted 3.3v power and has been put away

94: T1 has power supply damage and is likely permanently damaged. T2 is probably still usable.

 

2014-06-30, hazen

Trying to fill the 2nd crate. Install AMC13 in slots 1-8 and 13. Scan crate behaves badly (last couple of boards report 255's for IP addresses). Pull slots 1-4 so only 5-8 and 13 are filled. Slot 8 still has a problem. Only 7-8 and 13 filled, still slot 8 is bad.

 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2021 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback