Difference: TTTSoftwareDocumentation (3 vs. 4)

Revision 430 May 2013 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
This page overview the functionalities of the TTT software packages, including descriptions of the trigger scripts and the TTTtool commands.
Line: 8 to 8
 
setup_tts
Trigger Rules
Changed:
<
<
NOTE: The environment variable TTTIPADDRESS must be set correctly to talk to your board. As shipped the boards have fixed IP addresses set by jumpers. See "serial number table" on this page to find the address of your board. It is easiest to edit the "environ.sh" or "environ.csh" to set this variable before you start.
>
>
NOTE: The environment variable TTT_SERIAL_NUMBER must be set correctly to talk to your board. As shipped, the boards have fixed IP addresses which are uniquely determined by the board's serial number, which can be found printed on the front of your TTT module. It is easiest to edit the "environ.sh" or "environ.csh" scripts to set this variable before you start.
 

TTTtool

 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2020 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback