Difference: RatesTest (8 vs. 9)

Revision 924 Feb 2015 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="AMC13ToolRecipes"

High Rates Test Procedure

Line: 7 to 7
  Depending on the components you would like to test, uHTRs can be replace with other sub-system modules or with or AMC13 with special firmware, the TTT can be replace with a different TTC (or TCDS) source or with a loopback on the AMC13 and using local triggers.
  1. Make sure AMC13 (in AMC13 slot) and uHTR are installed properly in the crate and that the optical fiber from TTT is connected to AMC13 properly (top fiber to bottom and vice versa)
  2. Prepare uHTR and enable DAQlinks and local triggers. Using uHTRTool, follow recipe here.
Changed:
<
<
  1. Prepare AMC13 for data taking and enable link to desired uHTRs. You can use the AMC13Tool for this (additional information here):
>
>
  1. Prepare AMC13 for data taking and enable link to desired uHTRs. You can use the AMC13Tool for this (additional information here for AMC13Tool and here for AMC13Tool2 ):
 
    • NOTE: For now (July 16, 2013), only enable link to uHTR SN 4 (which is likely in the AMC10 slot), there seems to be a bug in SN 7 which is causing the system not to write events to the monitor buffer.
    • NOTE: examples will assume the use of a single uHTR in slot AMC10 (link 9). (Remember the physical crate counts from 1 while the links count from 0.)
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback