Difference: RatesTest (6 vs. 7)

Revision 712 Jun 2014 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="AMC13ToolRecipes"

High Rates Test Procedure

Test procedure for building events from uHTR, while using TTT as TTC source. Test procedure assumes certain tools are available, namely the AMC13Tool, the uHTRTool, and the TTTtool.
Changed:
<
<
  1. Make sure AMC13 and uHTR are installed properly in the crate and that the optical fiber from TTT is connected to AMC13 properly (top fiber to bottom and vice versa)
>
>
  1. Make sure AMC13 (in AMC13 slot) and uHTR are installed properly in the crate and that the optical fiber from TTT is connected to AMC13 properly (top fiber to bottom and vice versa)
 
  1. Prepare uHTR and enable DAQlinks and local triggers. Using uHTRTool, follow recipe here.
  2. Prepare AMC13 for data taking and enable link to desired uHTRs. You can use the AMC13Tool for this (additional information here):
    • NOTE: For now (July 16, 2013), only enable link to uHTR SN 4 (which is likely in the AMC10 slot), there seems to be a bug in SN 7 which is causing the system not to write events to the monitor buffer.
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback