| |
|
| |
-
- In the "Select Attached SPI/BPI" dialogue box, select "SPI PROM" in the first pull down box and M25P128 in the second dialogue box (use M25P32 for TTT board!), then hit OK
- Right click on the new FLASH box attached to your FPGA in the large sub-window's diagram and select "Program"
- This process may take quite a long time, so be patient. The large sub-window will let you know whether the FLASH program was successfull or problematic
|
|
<
< | |
>
> | |
| |
- Configure FPGA using Vivado (as an alternative to iMPACT)
- Download the following bit file to your computer (in a known, accessible location):
|
| |
-
- On the opening screen, click "Open Hardware Manager".
- At the top of the screen a bar will appear with the text "No hardware target is open." Click on "Open target" and select "Auto Connect" from the drop down menu.
- The device should appear on the left, with sub elements for both of the chips.
|
|
<
< |
-
- We want to program the Spartan chip! Right click on the name of the Spartan chip and select "Program XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"
- This should open a file browser on your computer. Find and select the bit file that you downloaded at the start of this process.
- Once you have done this, click program and select ok
|
>
> |
-
- We want to program the Spartan chip! Right click on the name of the Spartan chip and select "Program Device"
- Click on the "..." next to "Bitsteam file". Find and select the bit file that you downloaded at the start of this process. Leave "Debug probes file" black.
- Once you have done this, click Program.
|
| |
-
- Your Spartan chip should now be at firmware version 0x6. Do not cycle the power at this point.
- Repeat steps 7-10 for the T1 Virtex Chip
|
|
<
< |
-
- (If you're running a memory test for production testing, proceed with those steps now, before you program flash or power cycle the unit)
|
| |
-
- Use either AMC13Tool.exe in the C++ software or AMC13ToolFlash in the AMC13 software to update the flash for your Spartan and Virtex chips. You should program all 4 flash images (AMC13T2Header, AMC13T2Golden, AMC13T2Vxxxxx.mcs and AMC13T2Vxxxxx.mcs). After this last step is complete you should cycle the power and check that your versions are now the latest ones.
-- JimRohlf - 26 May 2012
\ No newline at end of file |
Copyright © 2008-2023 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.