Difference: FlashMemory (13 vs. 14)

Revision 1404 Apr 2014 - EricHazen

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Contents
Flash Layout
Line: 10 to 10
 
iMPACT Installation
Running iMPACT
iMPACT Troubleshooting
Changed:
<
<
Spartan Bit File (revised)
>
>
amc13T2v0x19.bit (LX25T only)
 

Flash Layout

Line: 25 to 25
 

Firmware Files

See AMC13Firmware page for current firmware releases.
Changed:
<
<		NOTE: earlier versions of the spartan firmware (pre v6) use address 0x0 for the Spartan. These modules can be reloaded without a cable by writing v6 to 0x0, powercycling to configure from flash, loading the flash according to the table above, and finally powercycling to get the current configuration.
>
>
 

Flash Programming Instructions

Changed:
<
<		1. Instructions on how to update your AMC13 firmware using AMC13Python software (recommended) are here

2. Instructions on how to update your AMC13 firmware using the xDAQ C++ AMC13Tool executable are here

>
>		1. Instructions on how to update your AMC13 firmware using the xDAQ C++ AMC13Tool executable are here
 
Changed:
<
<		3. Instructions on how to program your AMC13 from a bit file using a Xilinx JTAG cable are below:
>
>		2. Instructions on how to program your AMC13 from a bit file using a Xilinx JTAG cable are below:
 
  • NOTE: You generally should not have to program via JTAG unless your firmware has become corrupted and the AMC13 software can no longer talk to your module. If this is not the case and you can in fact communicate with your AMC13, please use the Python/C++ tools and follow the directions at the above links
View topic | History: r25 < r24 < r23 < r22 | More topic actions...
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2022 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback