Difference: FirmwareReleaseTesting (1 vs. 4)

• • Small events (default size 0x400)
    • Check 100kHz OFW threshold
      • Set to 100khz (localL1A r 100000 then lt c)
      • Rate averages 16 kHz with ~ 20% live (reset counters, delay a few sec, read overflow warning and ready time and calculate the ratio)
      • Event size threshold where OFW starts at 100kHz is 0x99 (very rare OFW)
    • Check OFW thresholds
      • wv CONF.EVB.MON_FULL_STOP_EVB 1 (stop when mon buffer full)
      • wv CONF.AMC.FAKE_DATA_SIZE 0x400 (default size)
      • wv 0x1c 0 (default trigger settings)
      • rg then rc
      • lt 0x400 1 (issue 0x400 triggers to fill monitor buffer, confirm it's full)
      • lt 95 1 (confirm still in TTC "RDY")
      • lt (confirm now in TTC "OFW")

For all tests below, should check the following:

• Status display OK
• Dump all registers using Eric's scripts, check deltas
• Dump data via monitor buffer and check
• Readout data with FEROL (1 and 2 links) and check
• Test maximum speed / backpressure performance
• Test various fixed and random fake data sizes
• Test both internal fake data and 0x1000 test data

Test conditions:

• Fake data in AMC13 ("en xxx f t")
  • Small events
  • Large events
  • Local (monitor buffer) and FEROL readout
• Real data from 0x1000 series firmware
  • Small events
  • Large events
  • Local (monitor buffer) and FE

-- EricHazen - 29 Mar 2016