Difference: DCC2BoardDatabase (75 vs. 76)

Revision 7624 Oct 2012 - PhilLawson

Line: 1 to 1

META TOPICPARENT	name="DCC2Documentation"

10 Prototype boards with red front panels were manufactured in early 2009. These boards are not identical to the production boards because they have a smaller FPGA. The production front panels are marked "DCC2" and are black.

Line: 64 to 64

2141	FED_723	Tested.	5/26	OK
2142	904 Hospital	Prior incident as different FED (3/24/10): Was removed when we had an issue where no HTRs were sending data. No other symptoms point to DCC failure. Removed on 10 May 2012 due to LRB DRAM failure: eLog Entry	9/10/12	BAD LRB
2143	FED_718	Tested. Ethernet error(RJ 45). Was not fixed. Returned to BU 6/9/09. Tested/shipped back to CERN 23 Jan 2012: Installed as FED 718 http://cmsonline.cern.ch/cms-elog/750159	23 Jan 2012	OK

Changed:

<
<

2144

904 Hospital

16 Nov 2012: Removed due to LRB DRAM issue: eLog Entry

. Not sure why we didn't address this guy over the winter

9/10/12

BAD LRB

>
>

2144

904 Spares

16 Nov 2012: Removed due to LRB DRAM issue: eLog Entry

. Not sure why we didn't address this guy over the winter
24 Oct 2012: Tested AOK after DRAM replacement eLog Entry

10/24/12

2145	FED_703	"Stops sending events down SLINK and goes to OFW at 80 kHz" . Tested OK by PDL 4/1/11	11/16	OK
2146	BU	Tested. Pin9 of HTR14 RJ45 to U14 line open. Could be a PCB problem.		Sick
2147	BU	Tested. Two broken LEDs, Ethernet error(RJ 45), and CRC error. R25 cold solder,D25 is also missing. Errors fixed as of 6/3		OK

Line: 123 to 123

Changes:

Added:

>
>

Updated 2144 which passed tests after DRAM replacement

-- PhilLawson - 24 Oct 2012

Updated to match latest round of spares installed. List of S/N installed in P5 is correct, not sure all other information is up to date.

View topic | History: r79 < r78 < r77 < r76 | More topic actions...