|
META TOPICPARENT |
name="DCC2Documentation" |
10 Prototype boards with red front panels were manufactured in early 2009. These boards are not identical to
the production boards because they have a smaller FPGA. The production front panels are marked "DCC2" and are black. |
|
2142 |
FED_727 |
Tested. |
5/26 |
2143 |
BU |
Tested. Ethernet error(RJ 45). Was not fixed. |
Accidentally shipped 5/26 |
2144 |
FED_722 |
Tested. |
5/26 |
|
|
< < |
2145 |
FED_719 |
Tested. |
5/26 |
|
> > |
2145 |
904 Hospital |
Stops sending events down SLINK and goes to OFW at 80 kHz |
11/16 |
|
|
2146 |
BU |
Tested. Pin9 of HTR14 RJ45 to U14 line open. Could be a PCB problem. |
|
2147 |
BU |
Tested. Two broken LEDs, Ethernet error(RJ 45), and CRC error. R25 cold solder,D25 is also missing. Errors fixed as of 6/3 |
2148 |
FED_721 |
Tested. |
5/26 |
2149 |
BU |
Tested. U0 soldering problem(most likely because U10 looks OK) Multiple lines to U10 without connection |
|
|
< < |
|
> > |
|
|
2151 |
CERN |
Tested. |
6/1 |
2152 |
FED_701 |
Tested. |
6/1 |
2153 |
FED_710 |
Tested. |
6/1 |
|
| EricHazen - 15 Apr 2009
Changes: |
|
< < | Logged in today and found FED 700 is now S/N 2160 (was previously 2001), FED 701 is now S/N 2152 (was previously 2002)
Problem with FED 710 & DSP FW 0x301c described above. |
> > |
- Logged in today and found FED 700 is now S/N 2160 (was previously 2001), FED 701 is now S/N 2152 (was previously 2002)
- Problem with FED 710 & DSP FW 0x301c described above.
|
|
-- PhilLawson - 26 Aug 2009
\ No newline at end of file |
|
> > |
- FED 719 (S/N 2145) was consistently going to OFW at 80 kHz. No events being sent down SLINK. Replaced DCC with S/N 2150
-- PhilLawson - 16 Nov 2009 |