Difference: CactusInstallation (1 vs. 7)

Revision 704 Sep 2013 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"

CACTUS Installation

This page contains instructions on how to install different CACTUS builds on supported operating systems. Many of these same instructions can be found the CACTUS wiki at https://svnweb.cern.ch/trac/cactus/wiki/
Line: 10 to 10
 

Install CACTUS on SLC5 (Scientific Linux CERN)

Changed:
<
<
CACTUS installation on SLC5 is supported by RPM/YUM
>
>
CACTUS installation on SLC5 is supported by RPM/YUM
 
  1. Download the CACTUS repo file

Revision 605 Aug 2013 - EricHazen

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"

CACTUS Installation

This page contains instructions on how to install different CACTUS builds on supported operating systems. Many of these same instructions can be found the CACTUS wiki at https://svnweb.cern.ch/trac/cactus/wiki/
Line: 35 to 35
 
  1. Check out the code from SVN into the desired location your machine.

Changed:
<
<
$ svn co https://svn.cern.ch/repos/cactus/trunk
>
>
$ svn co https://svn.cern.ch/reps/cactus/trunk
 
  1. Be sure the CACTUS root directory trunk/ is where you want it. In the following steps, I will just assume the code has been checked out into the user's home directory.
  2. Go the 'trunk' directory of the CACTUS code and build the package

Revision 508 May 2013 - CharlieHill

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Added:
>
>

CACTUS Installation

 This page contains instructions on how to install different CACTUS builds on supported operating systems. Many of these same instructions can be found the CACTUS wiki at https://svnweb.cern.ch/trac/cactus/wiki/

Contents
Line: 46 to 47
 

Install PyChips

Changed:
<
<
PyChips installation is not supported by RPM/YUM and must be done manually
>
>
NOTE that PyChips is not supported by IPbus v2, and therefore will not work with the AMC13XG or greater than AMC13 rev1 T1/T2 firmware version 0x25/0x13. PyChips installation is not supported by RPM/YUM and must be done manually
 
  1. Download the PyChips tar file from SVN to the desired directory on your machine (i.e. ${HOME}/PyChips_1_4_3)

Revision 427 Mar 2013 - CharlieHill

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
This page contains instructions on how to install different CACTUS builds on supported operating systems. Many of these same instructions can be found the CACTUS wiki at https://svnweb.cern.ch/trac/cactus/wiki/
Changed:
<
<

On SLC5 (Scientific Linux CERN)

>
>
Contents
Install CACTUS on SLC5
Install CACUS on SL5
Install PyChips
 
Added:
>
>

Install CACTUS on SLC5 (Scientific Linux CERN)

 CACTUS installation on SLC5 is supported by RPM/YUM

  1. Download the CACTUS repo file
Line: 11 to 16
 
  1. Copy the repo file to /etc/yum.repos.d

Changed:
<
<
sudo cp cactus.repo /etc/yum.repos.d
>
>
$ sudo cp cactus.repo /etc/yum.repos.d
 
  1. Install the software using YUM

Changed:
<
<
sudo yum groupinstall cactus
>
>
$ sudo yum groupinstall cactus
 
  1. When installation is complete, then the CACTUS software package should be in /opt/cactus
Changed:
<
<

On SL5 (Scientific Linux)

>
>

Install CACTUS on SL5 (Scientific Linux)

 CACTUS installation on SL5 is not supported by RPM/YUM and must be done manually.

  1. Install the prerequisites for the installation using YUM
Deleted:
<
<
 
Changed:
<
<
sudo yum -y install bzip2-devel zlib-devel ncurses-devel python-devel readline-devel
>
>
$ sudo yum -y install bzip2-devel zlib-devel ncurses-devel python-devel readline-devel
 
  1. Check out the code from SVN into the desired location your machine.

Changed:
<
<
svn co https://svn.cern.ch/repos/cactus/trunk
>
>
$ svn co https://svn.cern.ch/repos/cactus/trunk
 
  1. Be sure the CACTUS root directory trunk/ is where you want it. In the following steps, I will just assume the code has been checked out into the user's home directory.
  2. Go the 'trunk' directory of the CACTUS code and build the package

Changed:
<
<
cd ~/trunk/ make
>
>
$ cd ~/trunk/ $ make
 
  1. The build may take a long time--on the order of an hour--so be patient. If any errors occur, make sure that all of the above-mentioned prerequisites are indeed installed and up-to-date, and try again.
Added:
>
>

Install PyChips

PyChips installation is not supported by RPM/YUM and must be done manually

  1. Download the PyChips tar file from SVN to the desired directory on your machine (i.e. ${HOME}/PyChips_1_4_3)
       $ svn co http://cactus.hepforge.org/svn/branches/PyChips_1_4_3 ~/PyChips_1_4_3
       
  2. Set your environment
       $ export PYTHONPATH=$HOME/PyChips_1_4_3/src:$PYTHONPATH
       
  3. PyChips is successfully installed! In order to use it in a python script, be sure to include the statement from PyChipsUser import * at the head of your file
 

-- CharlieHill - 26 Oct 2012

Revision 301 Nov 2012 - CharlieHill

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
This page contains instructions on how to install different CACTUS builds on supported operating systems. Many of these same instructions can be found the CACTUS wiki at https://svnweb.cern.ch/trac/cactus/wiki/
Line: 19 to 19
 
  1. When installation is complete, then the CACTUS software package should be in /opt/cactus
Changed:
<
<
--+++ On SL5 (Scientific Linux)
>
>

On SL5 (Scientific Linux)

  CACTUS installation on SL5 is not supported by RPM/YUM and must be done manually.

  1. Install the prerequisites for the installation using YUM

Changed:
<
<
sudo yum -y install bzip2-devel zlib-devel ncurses-devel python-devel
>
>
sudo yum -y install bzip2-devel zlib-devel ncurses-devel python-devel readline-devel
 
Changed:
<
<
  1. Check out the code from SVN.
>
>
  1. Check out the code from SVN into the desired location your machine.
 
Changed:
<
<
svn co https://svn.cern.ch/reps/cactus/trunk
>
>
svn co https://svn.cern.ch/repos/cactus/trunk
 
Changed:
<
<
  1. Make sure you move it to the desired CACTUS root directory, which can be anywhere you have access to. In the following steps, I will just assume the code has been checked out into the user's home directory.
>
>
  1. Be sure the CACTUS root directory trunk/ is where you want it. In the following steps, I will just assume the code has been checked out into the user's home directory.
 
  1. Go the 'trunk' directory of the CACTUS code and build the package
          cd ~/trunk/
          make
          
Changed:
<
<
>
>
  1. The build may take a long time--on the order of an hour--so be patient. If any errors occur, make sure that all of the above-mentioned prerequisites are indeed installed and up-to-date, and try again.
 

Revision 231 Oct 2012 - CharlieHill

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
Deleted:
<
<
 This page contains instructions on how to install different CACTUS builds on supported operating systems. Many of these same instructions can be found the CACTUS wiki at https://svnweb.cern.ch/trac/cactus/wiki/
Changed:
<
<

On SLC5

>
>

On SLC5 (Scientific Linux CERN)

 
Changed:
<
<
Installation on SLC5 is supported by RPM/YUM
>
>
CACTUS installation on SLC5 is supported by RPM/YUM
 
  1. Download the CACTUS repo file
Line: 18 to 17
 
      sudo yum groupinstall cactus
      
Added:
>
>
  1. When installation is complete, then the CACTUS software package should be in /opt/cactus

--+++ On SL5 (Scientific Linux)

CACTUS installation on SL5 is not supported by RPM/YUM and must be done manually.

 
Added:
>
>
  1. Install the prerequisites for the installation using YUM
    1.       sudo yum -y install bzip2-devel zlib-devel ncurses-devel python-devel
            
  2. Check out the code from SVN.
          svn co https://svn.cern.ch/reps/cactus/trunk
          
  3. Make sure you move it to the desired CACTUS root directory, which can be anywhere you have access to. In the following steps, I will just assume the code has been checked out into the user's home directory.
  4. Go the 'trunk' directory of the CACTUS code and build the package
          cd ~/trunk/
          make
          
 

Revision 126 Oct 2012 - CharlieHill

Line: 1 to 1
Added:
>
>
META TOPICPARENT name="HcalDTC"

This page contains instructions on how to install different CACTUS builds on supported operating systems. Many of these same instructions can be found the CACTUS wiki at https://svnweb.cern.ch/trac/cactus/wiki/

On SLC5

Installation on SLC5 is supported by RPM/YUM

  1. Download the CACTUS repo file
  2. Copy the repo file to /etc/yum.repos.d
          sudo cp cactus.repo /etc/yum.repos.d
          
  3. Install the software using YUM
          sudo yum groupinstall cactus
          

-- CharlieHill - 26 Oct 2012

 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback