Difference: Amc13CppProductionSoftwareToDoList (33 vs. 34)

Revision 3425 Jan 2018 - DanielArcaro

Line: 1 to 1
 
META TOPICPARENT name="AMC13CppProductionSoftware"

To Do

Added:
>
>
2018-01-25 (djarcaro) The flash programming incorrectly selects an address when the name is slightly off. Example below:

Using a FW file called

AMC13T2Goldenv0xfff7_6slx45t.mcs
causes the FW to be written to the main T2 FW location:

Programming AMC13T2Goldenv0xfff7_6slx45t.mcs to flash address 0x200000...
Erasing flash sector at address 0x200000
Erasing flash sector at address 0x240000
Erasing flash sector at address 0x280000
Erasing flash sector at address 0x2c0000
Erasing flash sector at address 0x300000
Erasing flash sector at address 0x340000

...

Using AMC13 software ver:48372
Read firmware versions 0x225c 0xfff7

From a main T2 FW file:

Programming AMC13T2v0x0031_6slx45t.mcs to flash address 0x200000...

After taking out the 0xfff7 the problem goes away:

Programming AMC13T2Golden_6slx45t.mcs to flash address 0x80000...
Erasing flash sector at address 0x80000
 2016-06-10 (Owen)
  • Dan would like a command in AMC13Tool2.exe that print a history of the commands you entered.

 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback