Difference: AMC13UserManual (36 vs. 37)

Revision 3728 Sep 2017 - EricHazen

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
THIS MANUAL IS INCOMPLETE but what is written here should be more accurate and up to date than the old "functional specification". Please e-mail me if you find mistakes/omissions here (Eric H).
Line: 418 to 418
 
CONF.LTRIG.AMCxx.BITy.TRIGGER_MASK Set 8-bit mask for AMC number xx (01-11) trigger bit y (0-7)
CONF.LTRIG.BITy.TRIGGER_THRESHOLD Set 4-bit threshold (0-12) for trigger bit y (0-7)
Changed:
<
<

External Clock / Trigger Inputs (g-2)

>
>

External Clock / Trigger Inputs

 
Deleted:
<
<
The following section applies only to the g-2 firmware series (Kintex 0x8000 and up).
 The AMC13 clock and external trigger can come from one of 3 sources (optical fiber, internal or external copper signal). The choices are enumerated in the following table.
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2022 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback