Difference: AMC13UserManual (13 vs. 14)

Revision 1430 Mar 2015 - EricHazen

Line: 1 to 1
THIS MANUAL IS INCOMPLETE but what is written here should be more accurate and up to date than the old "functional specification". Please e-mail me if you find mistakes/omissions here (Eric H).
Line: 26 to 26
  After changing the DAQ output configuration the logic and high-speed transceivers must be reset by writing to ACTION.RESETS.DAQ (AMC13Tool2 command rd).
The DAQ sender firmware itself was provided by the CMS cDAQ group. Links to the firmware in the CERN SVN and it's documentation may be found here:



The TTS (Trigger Throttling System) output from the AMC13 is a four-bit code transmitted over

This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2023 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback