Difference: AMC13ToolGettingStarted (4 vs. 5)

Revision 519 May 2014 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
This page is designed to help you get familiar with the AMC13Tool C++ software and get comfortable with some basic AMC13 functionalities. For a more in-depth look at software commands, please visit the AMC13Tool link on the main page. For a more detailed description of certain AMC13 procedures, please visit the AMC13ToolRecipes link on the home page.
Line: 96 to 96
 ipw write to on ipbus device ('a' for all devices) ipst read status from all uhtrs
Added:
>
>
 
  1. As a test procedure, we will take periodic local events using internally generated fake data and the internal TTC signal.
    1. First, you will need to make sure your TTC optical fiber is properly connected. You will need to loop back a fiber to the bottom-most SFP on the AMC13 front panel.
    2. Next, you will need to enable the AMC ports, the internally generated TTC signal, and internal L1As. This can be done with the command:
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2020 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback