Difference: AMC13ToolGettingStarted (3 vs. 4)

Revision 404 Mar 2014 - DavidZou

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
This page is designed to help you get familiar with the AMC13Tool C++ software and get comfortable with some basic AMC13 functionalities. For a more in-depth look at software commands, please visit the AMC13Tool link on the main page. For a more detailed description of certain AMC13 procedures, please visit the AMC13ToolRecipes link on the home page.
Line: 100 to 100
 
    1. First, you will need to make sure your TTC optical fiber is properly connected. You will need to loop back a fiber to the bottom-most SFP on the AMC13 front panel.
    2. Next, you will need to enable the AMC ports, the internally generated TTC signal, and internal L1As. This can be done with the command:

Changed:
<
<
Pick an action (h for menu): en 0-11 f t L
>
>
Pick an action (h for menu): i 0-11 f t L
  Enabling AMC inputs from list: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 Link status: 04100fff Enable Fake Event Generator
Line: 108 to 108
  Enable Local L1A generation
'CONTROL1'
00201185
Added:
>
>
NOTE
The enable command in the first line ('i') is the same as ('en') these commands an be used interchangeably (e.g. 'en 0-11 f t L' works the same as the first line above).
 
    1. Now check the status of your AMC13 using the following command:
      Pick an action (h for menu): st
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2020 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback