Difference: AMC13Tool (17 vs. 18)

Revision 1803 Dec 2013 - EricHazen

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"

Using AMC13Tool

Line: 59 to 59
 
    • '<ena_list>' is the comma/space/hyphen separated list of AMC inputs to be enabled (of ports 0-11)
    • 'd' is an optional flag to enable the 'DAQLink' bit on register 'CONTROL1' (address 0x1)
    • 'f' is an optional flag to enable the 'Fake Data Generation' bit on register 'CONTROL1' (address 0x1)
Changed:
<
<
    • 't' is an optional flag to enable the 'TTCRx Commands' bit on register 'CONTROL1' (address 0x1)
>
>
    • 'r' is an optional flag to enable the 'TTCRx Commands' bit on register 'CONTROL1' (address 0x1)
    • 't' is an optional flag which causes the AMC13 to send TTC protocol out the TTS output
 
    • 'b' is an optional flag to enable the 'Stop EVB when Monitor Buffer Full' bit on register 'CONTROL1' (address 0x1)
    • NOTE: 'en' is a synonym to 'i'
    • e.g.
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback