Difference: AMC13Tool2Recipes (10 vs. 11)

Revision 1120 Apr 2016 - DanielGastler

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"
These instructions assume you have successfully installed and tested your software. See AMC13CppGettingStarted for instructions if you haven't
Line: 270 to 270
 Write to address 0
Added:
>
>
if you are using HCAL firmware also write
wv 0x17 0x80000000
 will send fake payloads between 0x400 and 0x1200 64-bit words in size.

After you've set all the fake payload sizes, return to the AMC13 in the MCH slot with the sel command. You must now enable the AMC13s that will send fake triggers with the en command using their slot number. In this example AMC13 SN 303 is in slot 2 of the crate.

 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2022 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback