Difference: AMC13Tool2 (4 vs. 5)

Revision 521 Oct 2014 - EricHazen

Line: 1 to 1

META TOPICPARENT	name="AMC13CppProductionSoftware"

AMC13Tool2 is a command-line utility designed to exercise all functions of the AMC13. The tool can be run in either interactive or scripted mode.

Line: 170 to 170

N to leave AMC13 out of run mode after initialization

Changed:

<
<

daq <config>

>
>

daq <config> (configure DAQ fiber output)

This command sets the configuration for the DAQ fiber (aka S-Link express, DAQLSC) outputs. Options:

1 - enable SFP0 (top) DAQ fiber for AMC1-AMC12 readout
2 - enable SFP0 for AMC1-AMC6, SFP1 for AMC7-AMC12
3 - enable SFP0 for AMC1-AMC4, SFP1 for AMC5-AMC8, SFP2 for AMC9-AMC12
d - disable all fibers

Note: recommend doing 'rd' (daq reset) after changing configuration

localL1A <mode> <burst> <rate> (Configure local L1A generator)

Option	Function <-- -->	Note
mode "d"	disable local L1A
rate	number of orbits or BX between triggers or random rate in 2Hz units
burst	number of triggers per burst in single-burst mode
mode "b"	specifies one trigger per <rate> BX
mode "o"	specifies one trigger per <rate> orbits
mode "r"	specifies random triggers in <rate> * 2 Hz

Deleted:

<
<

daq : Enable DAQ outputs Usage: daq 1|2|3 d 1 - enable SFP0 (top) DAQ fiber for AMC1-AMC12 readout 2 - enable SFP0 for AMC1-AMC6, SFP1 for AMC7-AMC12 3 - enable SFP0 for AMC1-AMC4, SFP1 for AMC5-AMC8, SFP2 for AMC9-AMC12 d - disable all fibers

note: recommend doing 'rd' (daq reset) after changing configuration localL1A : Configure local L1A generator Usage: localL1A options: o specifies one trigger per orbits b specifies one trigger per BX r specifies random triggers in * 2 Hz d disable local L1A burst: number of triggers per burst in single-burst mode rate: number of orbits or BX between triggers or random rate in 2Hz units

prescale : set prescale mode and factor Usage: prescale

View topic | History: r25 < r24 < r23 < r22 | More topic actions...