Difference: AMC13Tool2 (22 vs. 23)

Revision 2328 Jun 2021 - EricHazen

Line: 1 to 1
 
META TOPICPARENT name="AMC13CppProductionSoftware"
AMC13Tool2 is a command-line utility designed to exercise all functions of the AMC13. The tool can be run in either interactive or scripted mode.
Line: 207 to 207
  Note that CMS "standard" trigger rules are applied. Individual rules may be disabled, see Local_L1A_Generator.
Added:
>
>
CMS Standard Trigger Rule Number Description
<-- -->
Sorted ascending
1 No more than 1 trigger per every 2 bunch crossings (50ns)
2 No more than 2 triggers per every 25 bunch crossings (625ns)
3 No more than 3 triggers per every 100 bunch crossings (2.5us)
4 No more than 4 triggers per every 240 bunch crossings (6us)

Vale set in CONF.LOCAL_TRIG.RULES:

Register Value Rules Enforced
0 1, 2, 3, 4
1 1, 2, 3
2 1, 2
3 1
 
setOcrCommand (set orbit count reset TTC command)

Specify the TTC command to use for orbit count reset. Note that the low

 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2021 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback