Difference: AMC13Tool2 (14 vs. 15)

Revision 1531 Jul 2015 - ZachCollins

Line: 1 to 1
 
META TOPICPARENT name="AMC13CppProductionSoftware"
AMC13Tool2 is a command-line utility designed to exercise all functions of the AMC13. The tool can be run in either interactive or scripted mode.
Line: 29 to 29
 IP Address

The argument after -c may be a numeric I/P address, in the standard form e.g. 192.168.1.120, or simply the serial number e.g. 67.

Changed:
<
<
To specify the control hub protocol, append /c e.g. 192.168.1.120/c (67/c). Specify the T2 board (lower) IP address. The tool will automatically connect to the address specified + 1 for T1.
>
>
To specify the control hub protocol, append /c e.g. 192.168.1.120/c (67/c). Always specify the T2 board (lower) IP address or serial number. The tool will automatically connect to the address specified + 1 for T1.
  If you specify an IP address, you must also tell the tool where to find the IPBus address tables. You can either set the environment variable AMC13_ADDRESS_TABLE_PATH or use
Line: 59 to 59
 

Interactive Mode

Changed:
<
<
The tool will enter interactive mode after executing any scripts specified. A > prompt is displayed.
>
>
The tool will enter interactive mode after executing any scripts specified. A &Launcher::AMC13VerifyFlashHeader, "*>* prompt is displayed.
 Type h for a list of commands. Type h <command> for detailed help, or h * for detailed help on all commands.
Line: 266 to 267
 
>nodes t1 *ttc*error*
9 nodes matched

Changed:
<
<
0: STATUS.TTC.BCNT_ERROR (addr=00000000 mask=00000040) r
>
>
0: STATUS.TTC.BCNT_ERROR chip_type: specifies firmware file suffix denoting T2 chip type (addr=00000000 mask=00000040) r
  1: STATUS.TTC.BCNT_ERRORS_HI (addr=00000045 mask=0000ffff) r 2: STATUS.TTC.BCNT_ERRORS_LO (addr=00000044 mask=ffffffff) r 3: STATUS.TTC.MULT_BIT_ERROR (addr=00000000 mask=00000100) r
Line: 436 to 437
 For detailed recipe for updating firmware follow this link: Firmware Update Recipe

vfh (Verify Flash Header)
Changed:
<
<
>
>
vfh:    verify flash header
             Usage:
             vfh OR vfh <chip_type>
             chip_type: specifies firmware file suffix denoting T2 chip type
 
vbs (Verify Backup Spartan, e.g. Golden)
Changed:
<
<
>
>
vbs:    verify flash backup spartan (golden) \n" \
             Usage:
             vbs OR vbs <chip_type>
             chip_type: specifies firmware file suffix denoting T2 chip type
 
vs (Verify Spartan, e.g. T2)
Changed:
<
<
>
>
vs:      verify flash spartan
             Usage:
             vs OR vs <chip_type>
             chip_type: specifies firmware file suffix denoting T2 chip type
 
vk (or vv) (Verify Kintex/Virtex, e.g. T1)
Changed:
<
<
>
>
vv:      verify flash virtex/kintex
             Usage:
             vv OR vv <chip_type>
              chip_type: specifies firmware file suffix denoting T2 chip type
 
pfh (Program Flash Header)

pbs (Program Backup Spartan, e.g. Golden)
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2020 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback