Difference: AMC13Tool2 (13 vs. 14)

Revision 1431 Jul 2015 - ZachCollins

Line: 1 to 1
 
META TOPICPARENT name="AMC13CppProductionSoftware"
AMC13Tool2 is a command-line utility designed to exercise all functions of the AMC13. The tool can be run in either interactive or scripted mode.
Line: 28 to 28
  IP Address
Changed:
<
<
The argument after -c may be a numeric I/P address, in the standard form e.g. 192.168.1.120. To specify the control hub protocol, append /c e.g. 192.168.1.120/c. Specify the T2 board (lower) IP address. The tool will automatically connect to the address specified + 1 for T1.
>
>
The argument after -c may be a numeric I/P address, in the standard form e.g. 192.168.1.120, or simply the serial number e.g. 67. To specify the control hub protocol, append /c e.g. 192.168.1.120/c (67/c). Specify the T2 board (lower) IP address. The tool will automatically connect to the address specified + 1 for T1.
  If you specify an IP address, you must also tell the tool where to find the IPBus address tables. You can either set the environment variable AMC13_ADDRESS_TABLE_PATH or use
Line: 103 to 103
 
connect <module_id>
Changed:
<
<
Connect to an AMC13 using the specified IP address or connection file.
>
>
Connect to an AMC13 using the specified IP address, serial number, or connection file.
 See section above for details on the syntax.

list (fv)
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2020 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback