Difference: AMC13ProductionTesting (19 vs. 20)

Revision 2029 Oct 2015 - DavidZou

Line: 1 to 1

AMC13 Bench Test Instructions

1. Test Fixture
Line: 62 to 62
      1. Check that reg 0x7 (ErrCnt) is 0, or at least not changing
      2. Check that reg 0x4 (TxFB) and reg 0x5 (RxFB) are changing
      3. Check that bit 0 of reg 0x6 (T1_Ready) is 1
ii. in T1
    1. in T1
      1. Check that reg 0x1f (TTCcntr) is changing 1. Set bit 13 of reg 0xf to 1 to enable memory test with the following command: wv 0xf 020000 1. Check that reg 0xa (mem_sta) is changing. Otherwise, there is a memory errer
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2020 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback