Difference: AMC13ProductionTesting (18 vs. 19)

Revision 1925 Sep 2015 - AlexGuldemond

Line: 1 to 1
 
META TOPICPARENT name="HcalDTC"

AMC13 Bench Test Instructions

1. Test Fixture
Line: 14 to 14
 
    1. Header and Golden Files: http://bucms.bu.edu/twiki/bin/view/BUCMSPublic/AMC13FlashProgramming
    2. Spartan and Kintex Files: http://ohm.bu.edu/~dzou/firmware.cgi
  1. Set AMC13_ADDRESS_TABLE_PATH to the location of the address tables
Added:
>
>
    1. in bash: export AMC13_ADDRESS_TABLE_PATH=/path/to/address/table
    2. in csh: setenv AMC13_ADDRESS_TABLE_PATH /path/to/address/table
 
  1. Run AMC13BenchTest.exe -s serial_no
  2. Follow the on screen instructions
Changed:
<
<
    1. Note, test requires use of AVR studio and impact, instructions below
>
>
    1. Note, test requires use of AVR studio and impact
    2. impact instructions: (impact instructions)
    3. Test stand bit files: (test bit files)
    4. Initial bit file: http://physics.bu.edu/~wusx/download/AMC13/?C=M;O=D
 
  1. Update the board database with DNA numbers

3. Pre-Shipping Configuration

Line: 47 to 53
 
  1. Connect JTAG cable into FPGA port on AMC13
  2. Place TTC loop back SFP module into bottom SFP cage
  3. Place three 10G(8G) SFP loop back module into other three cages
Changed:
<
<
  1. Program test stand bit files into amc13 using iMPACT (Need to put files on Twiki) impact instructions: (impact instructions)
>
>
  1. Program test stand bit files into amc13 using iMPACT
    1. impact instructions: (impact instructions)
    2. Test stand bit files: (test bit files)
 
  1. Connect to amc13 using AMC13Tool2.exe -c serial_no
  2. Check the following regesters
    1. in T2
Line: 81 to 88
 
  1. Program initial bit file into Spartan FPGA using iMPACT Initial bit file: http://physics.bu.edu/~wusx/download/AMC13/?C=M;O=D
  2. Calculate the IP Adress of the module
Changed:
<
<
  1. Using AMC13ToolFlash.exe, program the flash memory: Header, Golden, Spartan, Kintex
>
>
  1. Using AMC13ToolFlash.exe, program the flash memory: Header, Golden, Spartan, Kintex (Flash Programming instructions)
 
    1. Header and Golden Files: Header and Golden
    2. Spartan and Kintex Files: firmware files
  1. Power cycle the amc13 to load firmware from flash
Changed:
<
<
  1. Connect to board with AMC13Tool2.exe and check the firmware with fv
>
>
  1. Connect to board with AMC13Tool2.exe and check the firmware with fv
  5. Event Builder Test
  1. Follow instructions for sending localL1A's and building fake events
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2019 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback