Difference: AMC13ProductionTesting (16 vs. 17)

Revision 1702 Jul 2015 - DavidZou

Line: 1 to 1

New 2014 Production Test

Line: 28 to 28
      1. Connect the JTAG cable and program the initial bit file into the Spartan FPGA (instructions using iMPACT)
      2. Log on to CMS2, calculate the IP address and ensure you can ping the module
      3. Using AMC13ToolFlash, program the flash memory: Header, Golden, Spartan, Kintex
      1. Select "L" command to reload all from flash, and issue "fv" to check the versions
      1. Power AMC13 to load firmware from flash
      2. Connect to AMC13 using AMC13Tool2 and check firmware with 'fv' command
    1. IP address setting check (MMC software documentations)
      1. Use applyConfig.py to set the IP addresses to a new value and check access
      2. Use storeConfig.py to set the IP addresses to a new value, cycle power and check access
This site is powered by the TWiki collaboration platform Powered by PerlCopyright © 2008-2020 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback